ADVERTISEMENT

Neutrino Energy to Power IoT Devices

In 2015, it was discovered that neutrinos have mass, so in theory, they can impact matter and give up some of their kinetic energy. Neutrino Energy Group is developing neutrino-based power generators by designing materials that can convert the kinetic energy of a neutrino into electricity. Such devices could be...

A Universal Symbol for Cryogenic Hazards

CSA was recently asked about a universal symbol to denote cryogenic hazards. Our contacts at NIST have helped answer those inquiries. While OSHA (Occupational Safety and Health Administration) does not provide a symbol, a cryogen “shipped” container would be labeled with the Gas Cylinder pictogram and a description of the...

Innovative Accelerator Achieves Full Energy Recovery

An innovative particle accelerator designed and built by scientists from the US Department of Energy’s Brookhaven National Laboratory and Cornell University has achieved a significant milestone that could greatly enhance the efficiency of future particle accelerators. After sending a particle beam for one pass through the accelerator, machine components recovered...

Hydrogen-Powered Bicycles Offer New Electromobility Concept

Pragma Industries has received an order for 1,000 bicycles from Chilean president Sebastian Pinera after 200 hydrogen bicycles were made available to journalists and world leaders at the recent G7 summit in Biarritz. The company’s founder, Pierre Forté, envisions that the bicycles will have an environmental impact in developing countries.

Particle Accelerators Drive Decades of Discoveries at Berkeley Lab and Beyond

Accelerators have been at the heart of the Department of Energy’s Lawrence Berkeley National Laboratory (Berkeley Lab) since its inception in 1931, and are still a driving force in the laboratory’s mission and its R&D program. Accelerator R&D and experiments at the lab—and lab scientists’ participation in experiments at other...

ADVERTISEMENT

Refrigerators and Liquefiers

Two of the most common terms used in cryogenics are “refrigerator” and “liquefier.” These terms describe similar and, as will be seen, in some cases identical components. A refrigerator provides cooling (that is, absorbs heat) at cryogenic temperatures. Refrigerators typically put a working fluid (such as helium) through one of...

Air Separation

Air separation is one of the largest, as well as earliest, industrial applications of cryogenics. In this process, cryogenic temperatures are used to separate air into its constituent gases: nitrogen (78.08%), oxygen (20.95%), argon (0.93%) and carbon dioxide (0.3%). Trace gases such as krypton, neon, xenon and helium total far...

Coefficient of Performance and Figure of Merit

The coefficient of performance (COP) is used to describe the effectiveness of refrigerators, including those operating at cryogenic temperatures. The COP is defined as the amount of heat removed at the cryogenic operating temperature of the refrigerator divided by the amount of work that must be applied to remove the...

Food Processing

Cryogenics and Food The industrial gas industry provides a host of products and services related to food. The various gases have useful and sometimes fascinating applications in food industry. “The food industry is not a homogenous industry. The needs of customers processing hamburger vs. poultry vs. strawberries vs. seafood, for...

Primary Standards

Elie K. Track Hypres, Inc. elie@hypres.com http://www.hypres.com/ Primary standards involve the exact definition and realization of units of measurement for various quantities, time, length, mass, voltage, resistance, current, etc. International agreements based on the latest scientific knowledge define those units, and their realizations vary depending on the unit itself. For...

Shrink Fitting

Robin A. Rhodes Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Shrink fitting, (or “compression fitting” as it is sometimes called), is a method used to insert a pin or bushing into a housing or other assembly requiring an extremely tight tolerance fit. It can be used as an alternative to...

Telecommunications

From the Winter 2004 issue of Cold Facts magazine The recent M-Calc IV — 4th Industry Assessment workshop discussing military and commercial applications for low-cost cryocoolers, held in November in San Diego, highlighted progress being made in cryogenics as applied in telecommunications. The reliability and long lifetime of projects now...

An Issue of Pressure and Flow Rate in a Supply Tank

Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...

Using MLI on VJ Line Joints or Cryo Storage Tanks

When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...