Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

Problem sending LN2 through hoses – need to minimize heat leak

We use liquid nitrogen at our power station to freeze light and heavy water in piping. The ice plug formed within the piping acts as a “valve” and allows us to work on a section of the piping system that otherwise cannot be isolated. The liquid nitrogen enters a jacket...

Cyclotron founder Henry Blosser leaves large legacy at MSU

When Michigan State University went looking for someone who could build a cyclotron from scratch, Henry Blosser wasn’t the first choice. He got the job only after two of his co-workers at Oak Ridge National Laboratory and a Canadian researcher had turned it down.

GE completes trials of HTS technology for power generation

GE’s Power Conversion has successfully completed trials of Hydrogenie, a power generator incorporating groundbreaking technologies that enable highly efficient production of electricity in a small space. Hydrogenie makes use of superconductors instead of copper for the rotor windings on the motor, operating at 43 Kelvin or -230°C.

Electron conflict leads to ‘bad traffic’ on way to superconductivity

Rice University physicists on the hunt for the origins of high-temperature superconductivity have published new findings about a seemingly contradictory state in which a material simultaneously exhibits the conflicting characteristics of both a metallic conductor and an insulator.

Light tsunami in a superconductor

An international research team at the Helmholtz-Zentrum Dresden-Rossendorf (HZDR) has managed to selectively influence superconductivity with a powerful terahertz laser. This very precise laser light turns into a vortex which moves through the superconductor like a tsunami.

AMS experiment measures antimatter excess in space

The international team running the Alpha Magnetic Spectrometer (AMS) announced on April 3 the first results in its search for dark matter. The AMS paper, to be published in the journal Physical Review Letters, reports the observation of an excess of positrons in the cosmic ray flux. AMS spokesperson Professor...

Latest in Defining Cryogenics

Two-Phase Flows

Two-phase flows are those flows in which there is a mixture of two physical states (solid, liquid or vapor). In cryogenic applications, such flows are almost always a mixture of a cryogenic liquid along with its corresponding vapor. A mixture of liquid helium and helium vapor would be a typical...

Supercritical Fluids

A supercritical fluid is defined as a substance whose temperature and pressure exceed those of its critical point. Every pure substance has a critical point that is defined in thermodynamic space by a critical temperature and a corresponding critical pressure. For example, the critical point for helium has a critical...

Brayton Cycle

The Brayton cycle is one of the many thermodynamic cycles used to generate cooling at cryogenic temperatures. Strictly speaking, when referring to cooling we should call this the reverse Brayton cycle as the original Brayton cycle describes the process of power generation or propulsion via a gas turbine. In many...

Latest in Cryo Central

Cryogenic Treatment of Materials

F.J. Diekman Controlled Thermal Processing, Inc. info@metal-wear.com Cryogenic Processing (also called cryogenic treatment, and incorrectly “cryogenic tempering”) is a process that uses cryogenic temperatures to modify materials to enhance their performance. Cryogenic Processing involves the slow reduction in temperature of the material to at least -300°F (-185°C) and holding the...

Cryogenics in Space

Peter Kittel University of California-Berkeley pkittel@cal.berkeley.edu Space Cryogenics is the application of cryogenics to space missions. These applications fall into two broad areas, supporting space science missions and supporting the space transportation infrastructure. Science applications: The atmosphere is opaque to much of the electro-magnetic spectrum. In space, the absence of...

Cryosurgery

Review of Cryosurgery Boris Rubinsky, PhD Hebrew University School of Science and Engineering Research Center for Biomedical Engineering 78b Ross Building Givat Ram, Jerusalem 91904 Israel rubinsky@cs.huji.ac.il as published in Annual Review of Biomedical Engineering, August 2000, Vol. 2, pp. 157-187. Abstract: Cryosurgery is a surgical technique that employs freezing...

Liquefied Natural Gas

Liquefied Natural Gas as it relates to the Field of Cryogenics John W. Bonn VJ Systems, LLC johnbonn@vjsystems-lic.com Today the world is looking for a cleaner fuel and Liquefied Natural Gas (LNG) plays a large part in achieving this goal. LNG in a liquid form is at -162°C (-259°F) and...

Latest in Ask the Experts

An Issue of Pressure and Flow Rate in a Supply Tank

Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...

Using MLI on VJ Line Joints or Cryo Storage Tanks

When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...

Separated layers of ice over a pipe

I want to know that why there are different layers of ice over a pipe carrying a cryogenic fluid, each layer separated with clear marks / lines? What do these layers signify?

Using nitrogen as a cryogen

Is it possible to achieve -200˚C using nitrogen as a cryogen?

CATEGORIES