Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

Shine on: Upgraded Advanced Photon Source sees first X-ray light for science

A new era of science at the Advanced Photon Source (APS) is ready to begin. On June 17, 2024, the facility at the U.S. Department of Energy’s (DOE) Argonne National Laboratory delivered its first X-ray light beams to a scientific beamline as part of a comprehensive and complex upgrade. The...

Space Systems Command Grants Contracts for Space Laser Communication Prototypes

The EST program, part of SSC’s Space Domain Awareness and Combat Power Program Executive Office, aims to create on-orbit crosslink compatibility among future space systems. This will be achieved through a standardized enterprise waveform implemented in a long-range space optical communications terminal that is low in size, weight, power, and...

Fusion Power Is Now a Possible Dream

Fusion power, the Holy Grail of nuclear energy for decades, may finally be within our grasp. If the scientists and engineers at Commonwealth Fusion Systems (CFS), a company with close ties to the Massachusetts Institute of Technology Plasma Science and Fusion Center, are right, fusion is nearly ready for power market...

Atomic Spreading Produces Novel Superconductors

Custom layering. A single layer of the topological insulator WTe2 (green) was placed on top of a row of palladium seeds (each roughly 0.5 µm wide). Over time, palladium atoms spread out across the layer and formed Pd7WTe2 (blue-green). The sample is shown before heating (left), after 25 minutes at 210 °C (center),...

100 Years of Quantum Is Just the Beginning

Recognizing the importance of quantum science and the need for wider awareness of its past and future impact, dozens of national scientific societies gathered together to support marking 100 years of quantum mechanics with a U.N.-declared international year. The timeline of endorsements for this international year also included the International Union of Pure and...

Cool It Down–Isochoric Preservation

If you’ve ever made the mistake of putting certain fresh fruits or vegetables in the freezer, then you’re already familiar with the effects of freezing on biological tissue. Banana skins turn black and slimy. Whole oranges leak and deflate. Lettuce comes out limp and soggy. The cause of all this...

Latest in Defining Cryogenics

Refrigerators and Liquefiers

Two of the most common terms used in cryogenics are “refrigerator” and “liquefier.” These terms describe similar and, as will be seen, in some cases identical components. A refrigerator provides cooling (that is, absorbs heat) at cryogenic temperatures. Refrigerators typically put a working fluid (such as helium) through one of...

Air Separation

Air separation is one of the largest, as well as earliest, industrial applications of cryogenics. In this process, cryogenic temperatures are used to separate air into its constituent gases: nitrogen (78.08%), oxygen (20.95%), argon (0.93%) and carbon dioxide (0.3%). Trace gases such as krypton, neon, xenon and helium total far...

Coefficient of Performance and Figure of Merit

The coefficient of performance (COP) is used to describe the effectiveness of refrigerators, including those operating at cryogenic temperatures. The COP is defined as the amount of heat removed at the cryogenic operating temperature of the refrigerator divided by the amount of work that must be applied to remove the...

Latest in Cryo Central

Primary Standards

Elie K. Track Hypres, Inc. elie@hypres.com http://www.hypres.com/ Primary standards involve the exact definition and realization of units of measurement for various quantities, time, length, mass, voltage, resistance, current, etc. International agreements based on the latest scientific knowledge define those units, and their realizations vary depending on the unit itself. For...

Shrink Fitting

Robin A. Rhodes Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Shrink fitting, (or “compression fitting” as it is sometimes called), is a method used to insert a pin or bushing into a housing or other assembly requiring an extremely tight tolerance fit. It can be used as an alternative to...

Telecommunications

From the Winter 2004 issue of Cold Facts magazine The recent M-Calc IV — 4th Industry Assessment workshop discussing military and commercial applications for low-cost cryocoolers, held in November in San Diego, highlighted progress being made in cryogenics as applied in telecommunications. The reliability and long lifetime of projects now...

Wind Tunnels

Dr. Robert Kilgore The development of the cryogenic wind tunnel is one of many significant breakthroughs in both cryogenics and wind-tunnel technology made during the past millennium. Interest in the development of high-speed commercial and military aircraft resulted in a review of problems of flow simulation in transonic wind tunnels...

Latest in Ask the Experts

An Issue of Pressure and Flow Rate in a Supply Tank

Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...

Using MLI on VJ Line Joints or Cryo Storage Tanks

When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...

Separated layers of ice over a pipe

I want to know that why there are different layers of ice over a pipe carrying a cryogenic fluid, each layer separated with clear marks / lines? What do these layers signify?

Using nitrogen as a cryogen

Is it possible to achieve -200˚C using nitrogen as a cryogen?

CATEGORIES