UK pulls out of ILC
A funding crisis at a leading research council in the UK, The Science and Technology Facilities Council (STFC), has forced the country to pull out of plans for the International Linear Collider (ILC).
ADVERTISEMENT
JLab achieves milestone in construction of $310-Million upgrade
A proposed $310-million project that will double the energy of the electron beam at the Thomas Jefferson National Accelerator Facility (Jefferson Lab) achieved a critical milestone on November 9, 2007, when the Department of Energy approved the project's performance baseline.
LCFOA elects Grimm and Urbin to Board
The Linear Collider Forum of America (LCFOA) has elected Dr. Terry Grimm of Niowave and John Urbin of Linde BOC Process Plants to their Board of Directors. Urbin is a CSA board member and Grimm, a CSA member, received the prestigious Boom award from the Society.
“Absolute Zero and the Conquest of Cold” miniseries gets rave reviews
The miniseries Absolute Zero and the Conquest of Cold aired in late July on British BBC4 to rave reviews.
CSA member John Moeller publishes book
CSA member John Moeller, a cryogenic engineering consultant and owner, Trinity Technology, has published his personal account of the early days of the US space program, "From Malabar to the Moon," a hardcover book.
Phillip L. Korodi has joined Eden Cryogenics as Senior Designer
Phillip L. Korodi has joined Eden Cryogenics as Senior Designer. He has had an extensive career in the cryogenic industry. At Eden he will be responsible for vacuum insulated piping design and development over a variety of applications, including turnkey cryogenic systems.
ADVERTISEMENT
Refrigerators and Liquefiers
Two of the most common terms used in cryogenics are “refrigerator” and “liquefier.” These terms describe similar and, as will be seen, in some cases identical components. A refrigerator provides cooling (that is, absorbs heat) at cryogenic temperatures. Refrigerators typically put a working fluid (such as helium) through one of...
Air Separation
Air separation is one of the largest, as well as earliest, industrial applications of cryogenics. In this process, cryogenic temperatures are used to separate air into its constituent gases: nitrogen (78.08%), oxygen (20.95%), argon (0.93%) and carbon dioxide (0.3%). Trace gases such as krypton, neon, xenon and helium total far...
Coefficient of Performance and Figure of Merit
The coefficient of performance (COP) is used to describe the effectiveness of refrigerators, including those operating at cryogenic temperatures. The COP is defined as the amount of heat removed at the cryogenic operating temperature of the refrigerator divided by the amount of work that must be applied to remove the...
Magnetic Levitation
From http://www.superconductors.org. Magnetic-levitation is an application where superconductors perform extremely well. Transport vehicles such as trains can be made to “float” on strong superconducting magnets, virtually eliminating friction between the train and its tracks. Not only would conventional electromagnets waste much of the electrical energy as heat, they would have...
Superconductivity
From Superpower website. History of Superconductivity Superconductivity was discovered in 1911 by the Dutch physicist, Heike Kammerlingh Onnes when he was able to liquefy helium by cooling it to 4 Kelvin, or -452°F. This enabled him to cool other materials close to absolute zero and investigate their electrical properties. He...
Medical Applications of Cryogenics
Neutron Therapy Cryogenics is at the heart of nuclear accelerators. Accelerators such as Fermilab’s Tevatron make neutron therapy for cancer possible. From Fermilab Today 4/20/09: Fermilab currently offers neutron therapy. But staff at Fermilab designed and built the proton accelerator used by the nation’s first hospital-based treatment center to use...
Nuclear Physics
Al Zeller National Superconducting Cyclotron Lab (NSCL) at Michigan State University zeller@nscl.msu.edu Cryogenics has a long history in nuclear physics. The technology has its origins in the use of cold traps for maintaining a vacuum, which is required to prevent beam loss and for generating high voltages used in acceleration....
An Issue of Pressure and Flow Rate in a Supply Tank
Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...
Using MLI on VJ Line Joints or Cryo Storage Tanks
When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...
Separated layers of ice over a pipe
I want to know that why there are different layers of ice over a pipe carrying a cryogenic fluid, each layer separated with clear marks / lines? What do these layers signify?