ADVERTISEMENT

Fermilab Achieves World-Record Field Strength for Accelerator Magnet

Scientists at the Department of Energy’s Fermilab (CSA CSM) have achieved the highest magnetic field strength ever recorded for an accelerator steering magnet, setting a world record of 14.1 teslas, with the magnet cooled to 4.5 kelvin or minus 450 degrees Fahrenheit. Lawrence Berkeley National Laboratory held the previous record...

First Hydrogen-Powered Bus Deployed in France

A hydrogen-powered passenger bus has been deployed in France for the first time, a step toward the country’s goal of a 100% clean-fueled bus fleet. With a range of 300km, the bus will run between the towns of Versailles and Jouy-en-Josas in the Yvelines region, and refuel its hydrogen tank...

Quest Thermal Group MLI Enters Space

Quest Thermal Group’s integrated multilayer insulation (IMLI) is currently being used in space on the ISS with NASA's RRM3 flight experiment and on the NASA/Ball Aerospace GPIM spacecraft. The group is also currently designing IMLI for use on the Lucy spacecraft—scheduled to go to Jupiter's asteroids—and is expected to have...

Neutrino Energy to Power IoT Devices

In 2015, it was discovered that neutrinos have mass, so in theory, they can impact matter and give up some of their kinetic energy. Neutrino Energy Group is developing neutrino-based power generators by designing materials that can convert the kinetic energy of a neutrino into electricity. Such devices could be...

A Universal Symbol for Cryogenic Hazards

CSA was recently asked about a universal symbol to denote cryogenic hazards. Our contacts at NIST have helped answer those inquiries. While OSHA (Occupational Safety and Health Administration) does not provide a symbol, a cryogen “shipped” container would be labeled with the Gas Cylinder pictogram and a description of the...

ADVERTISEMENT

Stability

Stability refers to the ability of a device employing superconductors to remain in its superconducting state after part of the superconductor transitions back to its normal conducting state due to a disturbance. While the concept can apply to many superconducting devices—transmission lines, generators, motors, etc.—it is most commonly considered in...

Cable-in-Conduit Conductors

Cable-in-Conduit Conductors (CICC) are a common form of superconducting cable used in large-scale applications. There are several varieties of CICCs, but they all consist of many small, stabilized superconducting wires contained within a conduit through which a coolant (typically supercritical He II) flows. Figure 1 shows the cross section of...

Bayonet Coupling

A bayonet coupling is a demountable joint that allows for quick and easy connection and disconnection of cryogenic components, including transfer lines, cryostats, liquefiers and refrigerators. Bayonets provide a number of advantages, chief among them the ability to connect and disconnect the bayonets while components they connect are still at...

Wind Tunnels

Dr. Robert Kilgore The development of the cryogenic wind tunnel is one of many significant breakthroughs in both cryogenics and wind-tunnel technology made during the past millennium. Interest in the development of high-speed commercial and military aircraft resulted in a review of problems of flow simulation in transonic wind tunnels...

History of Cryogenics

From the Fall 1999 issue of Cold Facts magazine Millennium Breakthroughs A variety of CSA members give different perspectives on the past millennium: What were the most significant breakthroughs in cryogenics during the past millennium? Prof. R.G. Scurlock, Kryos Technology, scurlock@soton.ac.uk (“Breakthrough” = way through obstacles — Oxford English Dictionary)...

Cryobiology

Andreas Sputtek Past President Society for Cryobiology sputtek@uke.uni-hamburg.de or http://www.sputtek.de/. The word cryobiology (from the Greek words “cryo” = cold, “bios” = life, and “logos” = science) literally signifies the science of life at low temperatures. In practice, this field comprises the study of any biological material or system (e.g.,...

Cryogenic Insulation

James E. Fesmire Cryogenics Test Laboratory NASA Kennedy Space Center james.e.fesmire@nasa.gov Introduction In today’s world, the use of cryogenics and low-temperature refrigeration is taking a more and more significant role. From the food industry, transportation, energy, and medical applications to the Space Shuttle, cryogenic liquids must be stored, handled, and...

An Issue of Pressure and Flow Rate in a Supply Tank

Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...

Using MLI on VJ Line Joints or Cryo Storage Tanks

When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...