Cold Facts Digital – Page 63 – The go-to place for Cryogenics and Superconductivity

NASA Developing Foam and Cork Insulation to Protect Deep Space Rocket

NASA is advancing state-of-the-art technology for thermal protection with more environmentally friendly materials and 3D printed molds for smaller parts. The agency says that extreme temperatures—ranging from -423°F to more than 200°F—call for novel thermal protection systems on the Space Launch System (SLS), its new heavy-lift rocket.

Spectroscopy Lab Finds New Property in Quantum Matter

A Johns Hopkins research team has proved that a particular quantum material can demonstrate electrical dipole fluctuations at conditions near -450°F, a theorized but never-before detected property involving irregular oscillations of tiny charged poles on the material.

Applied Superconductivity Center Names New Director

The reins of the Applied Superconductivity Center (ASC), hosted at the National High Magnetic Field Laboratory (CSA CSM), have been handed over to scientist and professor Lance Cooley, a CSA board director. Cooley takes over for his longtime mentor David Larbalestier, who will remain the chief scientist for materials at...

X-ray Tech Reveals Lost 19th Century Images

A team of scientists led by Western University in London, Ontario, Canada, has revealed how art curators can use light to recover images preserved on otherwise damaged daguerreotype silver plates.

Cold Testing Underway on ITER’s Toroidal Field Coils

Engineers from SIMIC S.p.a., a contractor based in Italy, have wrapped up the first round of cold testing the toroidal field coils manufactured for ITER, a process that involved submitting the coil winding pack to a thermal cycle between room temperature and 80 K.

New Superconducting Cable Surfaces from Research Supporting US Navy

A research team from Florida State University’s Center for Advanced Power Systems and the Colorado-based Advanced Conductor Technologies LLC has demonstrated the first high-temperature superconducting direct current power transmission cable using ACT’s Conductor on Round Core (CORC) cable technology. The cables enable transmission of vast amounts of power at high...

Latest in Defining Cryogenics

Stability

Stability refers to the ability of a device employing superconductors to remain in its superconducting state after part of the superconductor transitions back to its normal conducting state due to a disturbance. While the concept can apply to many superconducting devices—transmission lines, generators, motors, etc.—it is most commonly considered in...

Cable-in-Conduit Conductors

Cable-in-Conduit Conductors (CICC) are a common form of superconducting cable used in large-scale applications. There are several varieties of CICCs, but they all consist of many small, stabilized superconducting wires contained within a conduit through which a coolant (typically supercritical He II) flows. Figure 1 shows the cross section of...

Bayonet Coupling

A bayonet coupling is a demountable joint that allows for quick and easy connection and disconnection of cryogenic components, including transfer lines, cryostats, liquefiers and refrigerators. Bayonets provide a number of advantages, chief among them the ability to connect and disconnect the bayonets while components they connect are still at...

Latest in Cryo Central

Cryogenic Treatment of Materials

F.J. Diekman Controlled Thermal Processing, Inc. info@metal-wear.com Cryogenic Processing (also called cryogenic treatment, and incorrectly “cryogenic tempering”) is a process that uses cryogenic temperatures to modify materials to enhance their performance. Cryogenic Processing involves the slow reduction in temperature of the material to at least -300°F (-185°C) and holding the...

Cryogenics in Space

Peter Kittel University of California-Berkeley pkittel@cal.berkeley.edu Space Cryogenics is the application of cryogenics to space missions. These applications fall into two broad areas, supporting space science missions and supporting the space transportation infrastructure. Science applications: The atmosphere is opaque to much of the electro-magnetic spectrum. In space, the absence of...

Cryosurgery

Review of Cryosurgery Boris Rubinsky, PhD Hebrew University School of Science and Engineering Research Center for Biomedical Engineering 78b Ross Building Givat Ram, Jerusalem 91904 Israel rubinsky@cs.huji.ac.il as published in Annual Review of Biomedical Engineering, August 2000, Vol. 2, pp. 157-187. Abstract: Cryosurgery is a surgical technique that employs freezing...

Liquefied Natural Gas

Liquefied Natural Gas as it relates to the Field of Cryogenics John W. Bonn VJ Systems, LLC johnbonn@vjsystems-lic.com Today the world is looking for a cleaner fuel and Liquefied Natural Gas (LNG) plays a large part in achieving this goal. LNG in a liquid form is at -162°C (-259°F) and...

Latest in Ask the Experts

An Issue of Pressure and Flow Rate in a Supply Tank

Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...

Using MLI on VJ Line Joints or Cryo Storage Tanks

When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...

Separated layers of ice over a pipe

I want to know that why there are different layers of ice over a pipe carrying a cryogenic fluid, each layer separated with clear marks / lines? What do these layers signify?

Using nitrogen as a cryogen

Is it possible to achieve -200˚C using nitrogen as a cryogen?

CATEGORIES