Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

New NASA Gears Can Withstand Impact, Freezing Temperatures during Lunar Missions

A joint NASA JPl/Caltech project is developing special gears that can withstand the extreme temperatures experienced during missions to the Moon and beyond. Many exploration destinations in our solar system are frigid and require hardware that can withstand the extreme cold. During NASA’s Artemis missions, temperatures at the Moon’s South...

Technifab Introduces Updated Automatic Dewar Filling Station

Technifab Products (CSA CSM), a producer of cryogenic equipment and systems, released the latest version of their Automatic Fill Station, the AFS-01. The system is designed to fill portable low pressure liquid nitrogen dewars from a pipe system or bulk tank. The AFS-01 puts an emphasis on three main points:...

APS designates Sanford Lab, Morgan State University as historic physics sites

On September 14, the American Physical Society (APS) announced it has designated Sanford Lab Underground Research Facility (SURF) and Morgan State University as two Historic Sites in physics. SURF, located in Lead SD, is being recognized for its role in neutrino research led by Ray Davis while Morgan State University...

Lab Researcher and Physics Undergrad Creates Poster Project Honoring Black Physicists

Inspired by the nation’s grappling with issues of race and racial discrimination, UC Berkeley physics major and Berkeley Lab student assistant Ana Lyons turned to art as a way to contribute to the conversation. Aware of the scientific community’s own self-reflection for its history of racial inequity and discrimination, Lyons...

LIGO, Virgo Detect Most Massive Gravitational-Wave Source Yet

On September 2, researchers at LIGO (Laser Interferometer Gravitational-wave Observatory) in California and Virgo Interferometer have detected a signal from what may be the most massive black hole merger yet observed in gravitational waves. The product of the merger is the first clear detection of an “intermediate-mass” black hole, with...

Pandemic’s Global Slowdown Relieves Helium Industry Pressure

Last September, Cold Facts examined the then-ongoing third global helium shortage (Cold Facts, Vol. 35, Number 4) as it forced the world to reconsider the myriad applications and processes utilizing helium. Now, as the pandemic slows the global economy, helium users and experts are reconsidering what the future of helium...

Latest in Defining Cryogenics

Joule-Thomson Effect

The Joule-Thomson (JT) effect is a thermodynamic process that occurs when a fluid expands from high pressure to low pressure at constant enthalpy (an isenthalpic process). Such a process can be approximated in the real world by expanding a fluid from high pressure to low pressure across a valve. Under...

Current Leads

One of the challenges of using superconducting magnets is the connection of the magnet to a room temperature power supply. This is accomplished via current leads. The trick is that current leads should ideally have a low heat leak, since they connect room temperature to cryogenic temperature, while at the...

Multilayer Insulation

Multilayer insulation (also referred to as superinsulation) is a key component in the reduction of heat leak to cryogenic systems due to thermal radiation. MLI consists of a series of uncooled reflective surfaces placed in the vacuum space between two surfaces, one warmer than the other. Generally speaking, for ideal...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

Benefit of cryotreatment of audio circuit boards and interconnecting cables

Does cryotreatment of audio circuit boards and interconnecting cables (copper, silver, gold) properly done, provide a permanent benefit?

Standards and codes for design of cryogenic equipment?

What standards and codes are used in the design of cryogenic equipment?

Cryogenic thermophysical property data

I am in search of information regarding cryogenic thermophysical property data, specifically, Thermal Conductivity, Thermal Expansion, Stiffness and Modulus, in the 20K range. My list of materials include: Ti-6AL-4V (ELI), Al 6061-T651, and Invar (36%, plus any other composition which might have data available). Other materials which would be helpful...

Issue with insulation for ventilation system

I am with the Goodrich Corporation, an Aerospace products manufacturer. We currently utilize a number of environmental chambers (LN2 based) for environmental type conformity testing.

CATEGORIES