Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

New NASA Gears Can Withstand Impact, Freezing Temperatures during Lunar Missions

A joint NASA JPl/Caltech project is developing special gears that can withstand the extreme temperatures experienced during missions to the Moon and beyond. Many exploration destinations in our solar system are frigid and require hardware that can withstand the extreme cold. During NASA’s Artemis missions, temperatures at the Moon’s South...

Technifab Introduces Updated Automatic Dewar Filling Station

Technifab Products (CSA CSM), a producer of cryogenic equipment and systems, released the latest version of their Automatic Fill Station, the AFS-01. The system is designed to fill portable low pressure liquid nitrogen dewars from a pipe system or bulk tank. The AFS-01 puts an emphasis on three main points:...

APS designates Sanford Lab, Morgan State University as historic physics sites

On September 14, the American Physical Society (APS) announced it has designated Sanford Lab Underground Research Facility (SURF) and Morgan State University as two Historic Sites in physics. SURF, located in Lead SD, is being recognized for its role in neutrino research led by Ray Davis while Morgan State University...

Lab Researcher and Physics Undergrad Creates Poster Project Honoring Black Physicists

Inspired by the nation’s grappling with issues of race and racial discrimination, UC Berkeley physics major and Berkeley Lab student assistant Ana Lyons turned to art as a way to contribute to the conversation. Aware of the scientific community’s own self-reflection for its history of racial inequity and discrimination, Lyons...

LIGO, Virgo Detect Most Massive Gravitational-Wave Source Yet

On September 2, researchers at LIGO (Laser Interferometer Gravitational-wave Observatory) in California and Virgo Interferometer have detected a signal from what may be the most massive black hole merger yet observed in gravitational waves. The product of the merger is the first clear detection of an “intermediate-mass” black hole, with...

Pandemic’s Global Slowdown Relieves Helium Industry Pressure

Last September, Cold Facts examined the then-ongoing third global helium shortage (Cold Facts, Vol. 35, Number 4) as it forced the world to reconsider the myriad applications and processes utilizing helium. Now, as the pandemic slows the global economy, helium users and experts are reconsidering what the future of helium...

Latest in Defining Cryogenics

Refrigerators and Liquefiers

Two of the most common terms used in cryogenics are “refrigerator” and “liquefier.” These terms describe similar and, as will be seen, in some cases identical components. A refrigerator provides cooling (that is, absorbs heat) at cryogenic temperatures. Refrigerators typically put a working fluid (such as helium) through one of...

Air Separation

Air separation is one of the largest, as well as earliest, industrial applications of cryogenics. In this process, cryogenic temperatures are used to separate air into its constituent gases: nitrogen (78.08%), oxygen (20.95%), argon (0.93%) and carbon dioxide (0.3%). Trace gases such as krypton, neon, xenon and helium total far...

Coefficient of Performance and Figure of Merit

The coefficient of performance (COP) is used to describe the effectiveness of refrigerators, including those operating at cryogenic temperatures. The COP is defined as the amount of heat removed at the cryogenic operating temperature of the refrigerator divided by the amount of work that must be applied to remove the...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

Presence of alloying elements in tool steels

I want to expand my knowledge of cryogenics in general and tool steels in particular. Specifically, I am keenly interested in learning about the presence of alloying elements in tool steels and how their presence in various combinations affects the performance of tool steels after cryogenic treatment.

Pros and cons of barcoding samples

I was wondering if I could ask for input on pros and cons of barcoding. We are in the process of trying to decide if we should start barcoding our samples and I’m just not sure if this is feasible for our organization. We have numerous sites all over the...

Purity level of helium gas stream in cryo plant purification system

I would like to know what the principal methods and the relative instrumentation to check the purity level of helium gas stream in the purification system of a common helium cryogenic plant are. What principles are these instruments based on? And what are their principal characteristics?

LN2 for cryopreservation through controlled rate freezing of samples

I am the cryogenic specialist for a stem cell bank in Greece. I am trying to find the minimum requirements (purity, humidity, etc.) of liquid nitrogen for cryopreservation through controlled rate freezing of biological samples.

CATEGORIES