ADVERTISEMENT

First Instrument Delivered for Jupiter Icy Moon Explorer

The first instrument to fly on ESA’s Jupiter Icy Moon Explorer, or "Juice," has been delivered for integration onto the spacecraft this month. Juice is the first large-class mission in ESA's Cosmic Vision 2015–2025 program. With launch scheduled in 2022, it will arrive at Jupiter in 2029 to perform detailed...

SpaceX’s Starship SN1 Explodes Under Cryogenic Testing

The SN1 was undergoing liquid nitrogen (LN) testing when clouds of vapor appeared underneath. A split-second later, the system exploded, lifting the whole craft a few meters into the air. The stainless steel LN tank rapidly imploded and released more vapor from the top of the craft. No fire was...

Lancaster Team Tests LEGO® as Superior Sub-Kelvin Insulator

The Ultra Low Temperature Physics Group at Lancaster University in the UK has achieved the record for coldest LEGOs in the universe by cooling the plastic toys to 4 mK in early December. Dr. Dmitry Zmeev and PhD student Joshua Chawner tested the properties of four LEGO blocks and a...

Argonne Upgrades Enable Next-Generation Experiments

Building 203 looks unassuming, but behind—and beneath—its brick exterior, researchers are performing advanced experiments and developing support systems to answer some of physics’ biggest questions. In January, Cold Facts toured the physics building at Argonne National Laboratory (CSA CSM) in Lemont IL to learn more about the ongoing upgrades from...

Clean Energy Future: The Future is Getting Colder

From the developments in cryogenic applications over the last 20 years, we can see that the world in its technological workings is getting colder. But really, the world has been getting colder for the last 150 years as advancements in mastering cold have made steady progress. Liquid air for energy...

ADVERTISEMENT

Refrigerators and Liquefiers

Two of the most common terms used in cryogenics are “refrigerator” and “liquefier.” These terms describe similar and, as will be seen, in some cases identical components. A refrigerator provides cooling (that is, absorbs heat) at cryogenic temperatures. Refrigerators typically put a working fluid (such as helium) through one of...

Air Separation

Air separation is one of the largest, as well as earliest, industrial applications of cryogenics. In this process, cryogenic temperatures are used to separate air into its constituent gases: nitrogen (78.08%), oxygen (20.95%), argon (0.93%) and carbon dioxide (0.3%). Trace gases such as krypton, neon, xenon and helium total far...

Coefficient of Performance and Figure of Merit

The coefficient of performance (COP) is used to describe the effectiveness of refrigerators, including those operating at cryogenic temperatures. The COP is defined as the amount of heat removed at the cryogenic operating temperature of the refrigerator divided by the amount of work that must be applied to remove the...

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Suppliers of regenerator materials

I was looking for suppliers of regenerator materials. Can you please provide a list of vendors for: • Lead spheres • Bronze screen discs • Rare earth materials and spheres Thank you in advance for any help you can provide.

Containing ice accumulation while recovering helium

We are implementing a system to recover helium from our Janis ST-500 continuous flow LHe cryostat. The recovery system uses standard 1/4″ plastic tubing, which we connect directly to the cryostat’s exhaust port. The problem with this setup is that the gas is still quite cold as it leaves the...