ADVERTISEMENT

In Memoriam: David Pegg

Former president of the Society for Cryobiology, Dr. David Pegg has died at 86. Pegg helped set up the international Society for Cryobiology in 1964, and start its journal, Cryobiology, of which he later became editor in chief, eventually becoming the society’s president from 1974-75. A pioneer in the field...

ISRO To Test Semi-Cryogenic Engine In Ukraine

ISRO, the Indian space agency, moving on from their not-so-successful moon landing attempt, has started to look ahead to upcoming missions. The next feat is a group of liftoffs, starting with PSLV 47 later this month. The first step is inspection and trial of the semi-cryogenic engine in Ukraine.

KEK Publishes the International Working Group’s Recommendations for International Linear Collider

KEK has received the International Working Group’s report of recommendations regarding the International Linear Collider (ILC) project and published a document, “Recommendations on ILC Project Implementation," outlining the suggestions. The report calls for cost-sharing programs for the civil engineering projects, accelerator components, conventional facilities construction and operating costs. It goes...

World’s First Hydrogen Powered Boat Docks in London

The world's first hydrogen powered boat has docked in London, the last stop of its European tour. The 30-meter Energy Observer acts as a “floating lab” for testing green maritime technology. It harnesses electricity from three renewable energies¬¬¬–hydrogen, solar and wind–to propel the boat and charge its batteries. Using this...

“Orange” You Excited for SLAC’s New X-Ray Laser?

See upgrades to SLAC National Accelerator Laboratory’s X-ray laser, including some of the 37 cryomodules to be completed, in a collection of photos showcasing its trademark orange styling, and learn more about the experiments it will enable.

SOFIA Soars to Observe the Universe

SOFIA, the Stratospheric Observatory for Infrared Astronomy, is a unique plane-based observatory housed inside a 747 aircraft. A joint project between NASA, Universities Space Research Association, and the German Aerospace Center-DLR since 1997, it takes advantage of the stratosphere to eliminate the absorbing effect atmospheric water has on infrared observations....

ADVERTISEMENT

Refrigerators and Liquefiers

Two of the most common terms used in cryogenics are “refrigerator” and “liquefier.” These terms describe similar and, as will be seen, in some cases identical components. A refrigerator provides cooling (that is, absorbs heat) at cryogenic temperatures. Refrigerators typically put a working fluid (such as helium) through one of...

Air Separation

Air separation is one of the largest, as well as earliest, industrial applications of cryogenics. In this process, cryogenic temperatures are used to separate air into its constituent gases: nitrogen (78.08%), oxygen (20.95%), argon (0.93%) and carbon dioxide (0.3%). Trace gases such as krypton, neon, xenon and helium total far...

Coefficient of Performance and Figure of Merit

The coefficient of performance (COP) is used to describe the effectiveness of refrigerators, including those operating at cryogenic temperatures. The COP is defined as the amount of heat removed at the cryogenic operating temperature of the refrigerator divided by the amount of work that must be applied to remove the...

Food Processing

Cryogenics and Food The industrial gas industry provides a host of products and services related to food. The various gases have useful and sometimes fascinating applications in food industry. “The food industry is not a homogenous industry. The needs of customers processing hamburger vs. poultry vs. strawberries vs. seafood, for...

Primary Standards

Elie K. Track Hypres, Inc. elie@hypres.com http://www.hypres.com/ Primary standards involve the exact definition and realization of units of measurement for various quantities, time, length, mass, voltage, resistance, current, etc. International agreements based on the latest scientific knowledge define those units, and their realizations vary depending on the unit itself. For...

Shrink Fitting

Robin A. Rhodes Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Shrink fitting, (or “compression fitting” as it is sometimes called), is a method used to insert a pin or bushing into a housing or other assembly requiring an extremely tight tolerance fit. It can be used as an alternative to...

Telecommunications

From the Winter 2004 issue of Cold Facts magazine The recent M-Calc IV — 4th Industry Assessment workshop discussing military and commercial applications for low-cost cryocoolers, held in November in San Diego, highlighted progress being made in cryogenics as applied in telecommunications. The reliability and long lifetime of projects now...

An Issue of Pressure and Flow Rate in a Supply Tank

Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...

Using MLI on VJ Line Joints or Cryo Storage Tanks

When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...