ADVERTISEMENT

Innovative Accelerator Achieves Full Energy Recovery

An innovative particle accelerator designed and built by scientists from the US Department of Energy’s Brookhaven National Laboratory and Cornell University has achieved a significant milestone that could greatly enhance the efficiency of future particle accelerators. After sending a particle beam for one pass through the accelerator, machine components recovered...

Hydrogen-Powered Bicycles Offer New Electromobility Concept

Pragma Industries has received an order for 1,000 bicycles from Chilean president Sebastian Pinera after 200 hydrogen bicycles were made available to journalists and world leaders at the recent G7 summit in Biarritz. The company’s founder, Pierre Forté, envisions that the bicycles will have an environmental impact in developing countries.

Particle Accelerators Drive Decades of Discoveries at Berkeley Lab and Beyond

Accelerators have been at the heart of the Department of Energy’s Lawrence Berkeley National Laboratory (Berkeley Lab) since its inception in 1931, and are still a driving force in the laboratory’s mission and its R&D program. Accelerator R&D and experiments at the lab—and lab scientists’ participation in experiments at other...

Liquid Nitrogen as a Hair Solution?

Celebrity hairstylist Savio John Perreira is using cryogenics to treat hair at his Mumbai salon with the Cryo Detox hair treatment by Kerasol. The process includes a step where liquid nitrogen is sprayed on the hair strands. What could go wrong?

28th SCW Connects International Cryogenics Community

107 scientists, researchers and students attended CSA’s 28th Space Cryogenics Workshop held July 18 at the Heritage Hotel and Conference Center in Southbury CT. Attendees had the opportunity to share ideas in the form of back-to-back oral presentations with poster session breaks. The first day began with lectures on upcoming...

ADVERTISEMENT

Joule-Thomson Effect

The Joule-Thomson (JT) effect is a thermodynamic process that occurs when a fluid expands from high pressure to low pressure at constant enthalpy (an isenthalpic process). Such a process can be approximated in the real world by expanding a fluid from high pressure to low pressure across a valve. Under...

Current Leads

One of the challenges of using superconducting magnets is the connection of the magnet to a room temperature power supply. This is accomplished via current leads. The trick is that current leads should ideally have a low heat leak, since they connect room temperature to cryogenic temperature, while at the...

Multilayer Insulation

Multilayer insulation (also referred to as superinsulation) is a key component in the reduction of heat leak to cryogenic systems due to thermal radiation. MLI consists of a series of uncooled reflective surfaces placed in the vacuum space between two surfaces, one warmer than the other. Generally speaking, for ideal...

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Cryogenic thermophysical property data

I am in search of information regarding cryogenic thermophysical property data, specifically, Thermal Conductivity, Thermal Expansion, Stiffness and Modulus, in the 20K range. My list of materials include: Ti-6AL-4V (ELI), Al 6061-T651, and Invar (36%, plus any other composition which might have data available). Other materials which would be helpful...