ADVERTISEMENT

Innovative Accelerator Achieves Full Energy Recovery

An innovative particle accelerator designed and built by scientists from the US Department of Energy’s Brookhaven National Laboratory and Cornell University has achieved a significant milestone that could greatly enhance the efficiency of future particle accelerators. After sending a particle beam for one pass through the accelerator, machine components recovered...

Hydrogen-Powered Bicycles Offer New Electromobility Concept

Pragma Industries has received an order for 1,000 bicycles from Chilean president Sebastian Pinera after 200 hydrogen bicycles were made available to journalists and world leaders at the recent G7 summit in Biarritz. The company’s founder, Pierre Forté, envisions that the bicycles will have an environmental impact in developing countries.

Particle Accelerators Drive Decades of Discoveries at Berkeley Lab and Beyond

Accelerators have been at the heart of the Department of Energy’s Lawrence Berkeley National Laboratory (Berkeley Lab) since its inception in 1931, and are still a driving force in the laboratory’s mission and its R&D program. Accelerator R&D and experiments at the lab—and lab scientists’ participation in experiments at other...

Liquid Nitrogen as a Hair Solution?

Celebrity hairstylist Savio John Perreira is using cryogenics to treat hair at his Mumbai salon with the Cryo Detox hair treatment by Kerasol. The process includes a step where liquid nitrogen is sprayed on the hair strands. What could go wrong?

28th SCW Connects International Cryogenics Community

107 scientists, researchers and students attended CSA’s 28th Space Cryogenics Workshop held July 18 at the Heritage Hotel and Conference Center in Southbury CT. Attendees had the opportunity to share ideas in the form of back-to-back oral presentations with poster session breaks. The first day began with lectures on upcoming...

ADVERTISEMENT

Refrigerators and Liquefiers

Two of the most common terms used in cryogenics are “refrigerator” and “liquefier.” These terms describe similar and, as will be seen, in some cases identical components. A refrigerator provides cooling (that is, absorbs heat) at cryogenic temperatures. Refrigerators typically put a working fluid (such as helium) through one of...

Air Separation

Air separation is one of the largest, as well as earliest, industrial applications of cryogenics. In this process, cryogenic temperatures are used to separate air into its constituent gases: nitrogen (78.08%), oxygen (20.95%), argon (0.93%) and carbon dioxide (0.3%). Trace gases such as krypton, neon, xenon and helium total far...

Coefficient of Performance and Figure of Merit

The coefficient of performance (COP) is used to describe the effectiveness of refrigerators, including those operating at cryogenic temperatures. The COP is defined as the amount of heat removed at the cryogenic operating temperature of the refrigerator divided by the amount of work that must be applied to remove the...

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Getter materials to absorb out gassed materials?

Here’s one for the scientists: We would like to sell vacuum insulated pipe for high temperature fluid applications. Are there any good getter materials that we can place in the vacuum space of our VJP to absorb outgassed materials at elevated temperatures?