Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

NASA Developing Foam and Cork Insulation to Protect Deep Space Rocket

NASA is advancing state-of-the-art technology for thermal protection with more environmentally friendly materials and 3D printed molds for smaller parts. The agency says that extreme temperatures—ranging from -423°F to more than 200°F—call for novel thermal protection systems on the Space Launch System (SLS), its new heavy-lift rocket.

Spectroscopy Lab Finds New Property in Quantum Matter

A Johns Hopkins research team has proved that a particular quantum material can demonstrate electrical dipole fluctuations at conditions near -450°F, a theorized but never-before detected property involving irregular oscillations of tiny charged poles on the material.

Applied Superconductivity Center Names New Director

The reins of the Applied Superconductivity Center (ASC), hosted at the National High Magnetic Field Laboratory (CSA CSM), have been handed over to scientist and professor Lance Cooley, a CSA board director. Cooley takes over for his longtime mentor David Larbalestier, who will remain the chief scientist for materials at...

X-ray Tech Reveals Lost 19th Century Images

A team of scientists led by Western University in London, Ontario, Canada, has revealed how art curators can use light to recover images preserved on otherwise damaged daguerreotype silver plates.

Cold Testing Underway on ITER’s Toroidal Field Coils

Engineers from SIMIC S.p.a., a contractor based in Italy, have wrapped up the first round of cold testing the toroidal field coils manufactured for ITER, a process that involved submitting the coil winding pack to a thermal cycle between room temperature and 80 K.

New Superconducting Cable Surfaces from Research Supporting US Navy

A research team from Florida State University’s Center for Advanced Power Systems and the Colorado-based Advanced Conductor Technologies LLC has demonstrated the first high-temperature superconducting direct current power transmission cable using ACT’s Conductor on Round Core (CORC) cable technology. The cables enable transmission of vast amounts of power at high...

Latest in Defining Cryogenics

Regenerators

Regenerators or regenerative heat exchangers are a key component of cryocoolers such as pulse tube cryocoolers (Cold Facts, August 2014). Regenerator performance greatly affects the coefficient of performance of cryocoolers. Improvements in regenerator design and, in particular, regenerator materials have been an important factor in the improvement of the performance...

Pulse Tube Cryocoolers

The development of pulse tube cryocoolers has been a significant topic of research and development over the past 20 or so years. Pulse tube cryocoolers have a number of advantages over other types of cryocoolers and are now available commercially. In order to understand pulse tube cryocoolers, it’s best to...

Thermal Expansion

Thermal expansion refers to the change in size (length or volume) that a material undergoes as its temperature changes. In cryogenic systems this effect can be quite large and must be allowed for in the design. In isotropic materials, which include most engineering materials, the thermal expansion is the same...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

Resistance to embrittlement at low temperatures

Could anyone advise me about resistance to embrittlement at low temperatures for the alloys in subject, i.e. does the CF10M perform like the CF8M in the same cryogenic service (-215F)? Amara Maafi Amara.Maafi@bg-group.com

Need help with temperature dependent model

I am a fourth-year student at New Zealand University. My name is Xu Ke. I have a project to generate a temperature dependent model for inductor, capacitor and diode by using PLECS. PLECS is software which acts as a toolbox for MATLAB. In my models, the temperature is very low,...

In what form is water available in LN2?

Does anybody know in what form water is available in LN2? There probably is a block of ice in the bottom of the tank. But as water comes in many shapes, I can imagine snow or crystals floating free in the LN2. When water is available in LN2, could small...

Separating gases using cryogenics

We are looking for some consulting engineers who understand how to separate gases using cryogenics. We have a new process which takes biomass and converts it to 5 gases and we need to separate these gases into their pure forms. Thanks for your help. Malcolm Draper Energy Research Group LLC...

CATEGORIES