Light
Dark
Join CSA

ADVERTISEMENT

Latest in News
Modifying gas chromatography systems with cryogenic technologies Subscribe for newsletter updates Researchers at Monash University in Clayton, Australia, have developed a new 3D-printed device for gas chromatography (GC), demonstrating its effectiveness in carrying out multidimensional and enantioselective separations. GC has long been central to chemical analysis, particularly for mixtures of volatile compounds. However, its resolution can be insufficient for separating complex mixtures. Scientists have addressed this limitation with techniques such as multidimensional gas chromatography (MDGC) and comprehensive two-dimensional gas chromatography (GC × GC), which both require modulation devices. Thermal modulators, among the earliest developed, remain widely used. In this study, the researchers designed a stainless steel 3D-printed device to function as a cold trapping assembly when cooled with liquid CO₂. Its operational principle mirrors that of a longitudinally modulated cryogenic system (LMCS). Cryogenic technologies have precedent in chromatography, offering the capacity to remobilise trapped components, thereby enabling new analytical approaches. When integrated with GC, such devices allow analysts to apply advanced separation techniques. The team detailed the enclosure design and assessed its performance for collecting and rapidly remobilising volatile organic compounds (VOCs). Modulation period precision was evaluated, yielding a maximum error of 8 microseconds and an average variation of less than 1 nanosecond across 10,000 successive modulations. Using a C5–C9 alkane series, the system was shown to effectively trap analytes, with peaks achieving a full width at half height (FWHH) as low as 65 milliseconds. The maximum trapping time was determined using hexane, with the modulator retaining the compound for up to 9 seconds at 100 °C before breakthroughs occurred. The system was also used to investigate the enantioselective separation of limonene, a compound derived from citrus peel oils. Although only one chiral column was used, different column lengths (ranging from 20 cm to 5.0 m) were drawn through the modulator. These effectively acted as enantioselective second-dimension (2D) columns. Injected (R,S)-limonene enantiomers were collected simultaneously and then rapidly transferred to the 2D column. The 3D-printed modulator successfully trapped hexane, enabling modulation periods of up to 8 seconds. This was achieved at oven temperatures of up to 100 °C. While higher temperatures were not tested, the researchers suggest that hexane modulation beyond this point is likely feasible. Ultimately, the study demonstrated the feasibility of comprehensive two-dimensional GC using 3D-printed modulators with a tea tree oil sample. Although 2D retention times exceeded optimal limits for GC × GC under the conditions tested, the authors propose that further refinement of columns and methods could yield improved separation.
News

Modifying Gas Chromatography Systems with Cryogenic Technologies

Clayton Campus, Melbourne, Victoria. Credit: Montash University, Australia Researchers at Monash University in Clayton, Australia, have developed a new 3D-printed device for gas chromatography (GC), demonstrating its effectiveness in carrying out multidimensional and enantioselective separations. GC has long been central to chemical analysis, particularly for mixtures of volatile compounds. However,...
June 24, 2025
ITER conference
News

Strong Project Execution and the Latest Big Lift with ITER

Just two months ago, in April, the first of nine vacuum vessel sectors had been lowered into the tokamak assembly pit. A second was inserted this week in a nighttime operation that ended just as the 36th ITER Council was getting started. Delegates were transported on site to witness the accomplishment...
June 24, 2025
AeroDelft First Student Team to Test Liquid Hydrogen Aircraft Propulsion System
News

AeroDelft First Student Team to Test Liquid Hydrogen Aircraft Propulsion System

AeroDelft, a fully student-run and student-owned non-profit foundation based in Delft, has become the first student team in the world to design, build, and test an electric aircraft propulsion system (powertrain) using liquid hydrogen as its energy source. The successful test was conducted in collaboration with TNO at their liquid...
June 24, 2025
News

Omniseal is Sealing the Future of Space Travel with Cryogenic Innovation

Omniseal® SPRING-ENERGIZED SEALS. Image Credit: Omniseal Solutions In the high-stakes world of space exploration, success can hinge on something as seemingly simple as a seal. Yet in the harsh, unforgiving conditions of space—from cryogenic temperatures to violent mechanical shocks—nothing is simple. That’s where advanced sealing technology, like the cryogenic solutions engineered by...
June 22, 2025
News

How AI Is Supporting Operations and Revolutionizing Research at ATLAS

. In the quest to solve fundamental mysteries about the universe, nuclear physics stands at the forefront, probing the very building blocks of matter and the forces that govern their interactions. At the U.S. Department of Energy’s (DOE) Argonne National Laboratory, a prominent fixture in this exploration is the Argonne Tandem...
June 22, 2025
News

Ebara Elliott Energy Begins Construction on New Abu Dhabi Facility

Ebara Elliott Energy (EEE) has started construction on a new, state-of-the-art service center in Abu Dhabi, located in KEZAD with operations to launch in Q3 2026. The facility is a key part of EEE’s strategy to expand its regional presence and deliver faster, more localized support to customers across the Middle East. (Watch video.)...
June 22, 2025

ADVERTISEMENT

Latest in Defining Cryogenics
Defining Cryogenics

Joule-Thomson Effect

The Joule-Thomson (JT) effect is a thermodynamic process that occurs when a fluid expands from high pressure to low pressure at constant enthalpy (an isenthalpic process). Such a process can be approximated in the real world by expanding a fluid from high pressure to low pressure across a valve. Under...
September 26, 2011
Defining Cryogenics

Current Leads

One of the challenges of using superconducting magnets is the connection of the magnet to a room temperature power supply. This is accomplished via current leads. The trick is that current leads should ideally have a low heat leak, since they connect room temperature to cryogenic temperature, while at the...
September 26, 2011
Defining Cryogenics

Multilayer Insulation

Multilayer insulation (also referred to as superinsulation) is a key component in the reduction of heat leak to cryogenic systems due to thermal radiation. MLI consists of a series of uncooled reflective surfaces placed in the vacuum space between two surfaces, one warmer than the other. Generally speaking, for ideal...
September 26, 2011
Latest in Cryo Central
Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
May 29, 2020
Cryo Central

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
August 10, 2010
Cryo Central

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
June 18, 2010
Cryo Central

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
May 28, 2010
Latest in Ask the Experts
Ask the Experts

Source for small gas liquefier/cryocooler?

I would like to acquire a used gas liquefier/cryocooler for use in my non-profit project to build a high-performance natural gas (methane) powered car. I am interested in liquefying piped natural gas (methane) into LNG (about 120K or -154 degrees).
August 1, 2008