Light
Dark
Join CSA

ADVERTISEMENT

Latest in News
Modifying gas chromatography systems with cryogenic technologies Subscribe for newsletter updates Researchers at Monash University in Clayton, Australia, have developed a new 3D-printed device for gas chromatography (GC), demonstrating its effectiveness in carrying out multidimensional and enantioselective separations. GC has long been central to chemical analysis, particularly for mixtures of volatile compounds. However, its resolution can be insufficient for separating complex mixtures. Scientists have addressed this limitation with techniques such as multidimensional gas chromatography (MDGC) and comprehensive two-dimensional gas chromatography (GC × GC), which both require modulation devices. Thermal modulators, among the earliest developed, remain widely used. In this study, the researchers designed a stainless steel 3D-printed device to function as a cold trapping assembly when cooled with liquid CO₂. Its operational principle mirrors that of a longitudinally modulated cryogenic system (LMCS). Cryogenic technologies have precedent in chromatography, offering the capacity to remobilise trapped components, thereby enabling new analytical approaches. When integrated with GC, such devices allow analysts to apply advanced separation techniques. The team detailed the enclosure design and assessed its performance for collecting and rapidly remobilising volatile organic compounds (VOCs). Modulation period precision was evaluated, yielding a maximum error of 8 microseconds and an average variation of less than 1 nanosecond across 10,000 successive modulations. Using a C5–C9 alkane series, the system was shown to effectively trap analytes, with peaks achieving a full width at half height (FWHH) as low as 65 milliseconds. The maximum trapping time was determined using hexane, with the modulator retaining the compound for up to 9 seconds at 100 °C before breakthroughs occurred. The system was also used to investigate the enantioselective separation of limonene, a compound derived from citrus peel oils. Although only one chiral column was used, different column lengths (ranging from 20 cm to 5.0 m) were drawn through the modulator. These effectively acted as enantioselective second-dimension (2D) columns. Injected (R,S)-limonene enantiomers were collected simultaneously and then rapidly transferred to the 2D column. The 3D-printed modulator successfully trapped hexane, enabling modulation periods of up to 8 seconds. This was achieved at oven temperatures of up to 100 °C. While higher temperatures were not tested, the researchers suggest that hexane modulation beyond this point is likely feasible. Ultimately, the study demonstrated the feasibility of comprehensive two-dimensional GC using 3D-printed modulators with a tea tree oil sample. Although 2D retention times exceeded optimal limits for GC × GC under the conditions tested, the authors propose that further refinement of columns and methods could yield improved separation.
News

Modifying Gas Chromatography Systems with Cryogenic Technologies

Clayton Campus, Melbourne, Victoria. Credit: Montash University, Australia Researchers at Monash University in Clayton, Australia, have developed a new 3D-printed device for gas chromatography (GC), demonstrating its effectiveness in carrying out multidimensional and enantioselective separations. GC has long been central to chemical analysis, particularly for mixtures of volatile compounds. However,...
June 24, 2025
ITER conference
News

Strong Project Execution and the Latest Big Lift with ITER

Just two months ago, in April, the first of nine vacuum vessel sectors had been lowered into the tokamak assembly pit. A second was inserted this week in a nighttime operation that ended just as the 36th ITER Council was getting started. Delegates were transported on site to witness the accomplishment...
June 24, 2025
AeroDelft First Student Team to Test Liquid Hydrogen Aircraft Propulsion System
News

AeroDelft First Student Team to Test Liquid Hydrogen Aircraft Propulsion System

AeroDelft, a fully student-run and student-owned non-profit foundation based in Delft, has become the first student team in the world to design, build, and test an electric aircraft propulsion system (powertrain) using liquid hydrogen as its energy source. The successful test was conducted in collaboration with TNO at their liquid...
June 24, 2025
News

Omniseal is Sealing the Future of Space Travel with Cryogenic Innovation

Omniseal® SPRING-ENERGIZED SEALS. Image Credit: Omniseal Solutions In the high-stakes world of space exploration, success can hinge on something as seemingly simple as a seal. Yet in the harsh, unforgiving conditions of space—from cryogenic temperatures to violent mechanical shocks—nothing is simple. That’s where advanced sealing technology, like the cryogenic solutions engineered by...
June 22, 2025
News

How AI Is Supporting Operations and Revolutionizing Research at ATLAS

. In the quest to solve fundamental mysteries about the universe, nuclear physics stands at the forefront, probing the very building blocks of matter and the forces that govern their interactions. At the U.S. Department of Energy’s (DOE) Argonne National Laboratory, a prominent fixture in this exploration is the Argonne Tandem...
June 22, 2025
News

Ebara Elliott Energy Begins Construction on New Abu Dhabi Facility

Ebara Elliott Energy (EEE) has started construction on a new, state-of-the-art service center in Abu Dhabi, located in KEZAD with operations to launch in Q3 2026. The facility is a key part of EEE’s strategy to expand its regional presence and deliver faster, more localized support to customers across the Middle East. (Watch video.)...
June 22, 2025

ADVERTISEMENT

Latest in Defining Cryogenics
Defining Cryogenics

Regenerators

Regenerators or regenerative heat exchangers are a key component of cryocoolers such as pulse tube cryocoolers (Cold Facts, August 2014). Regenerator performance greatly affects the coefficient of performance of cryocoolers. Improvements in regenerator design and, in particular, regenerator materials have been an important factor in the improvement of the performance...
November 17, 2014
Defining Cryogenics

Pulse Tube Cryocoolers

The development of pulse tube cryocoolers has been a significant topic of research and development over the past 20 or so years. Pulse tube cryocoolers have a number of advantages over other types of cryocoolers and are now available commercially. In order to understand pulse tube cryocoolers, it’s best to...
September 29, 2014
Defining Cryogenics

Thermal Expansion

Thermal expansion refers to the change in size (length or volume) that a material undergoes as its temperature changes. In cryogenic systems this effect can be quite large and must be allowed for in the design. In isotropic materials, which include most engineering materials, the thermal expansion is the same...
August 26, 2014
Latest in Cryo Central
Cryo Central

Wind Tunnels

Dr. Robert Kilgore The development of the cryogenic wind tunnel is one of many significant breakthroughs in both cryogenics and wind-tunnel technology made during the past millennium. Interest in the development of high-speed commercial and military aircraft resulted in a review of problems of flow simulation in transonic wind tunnels...
April 18, 2008
Cryo Central

History of Cryogenics

From the Fall 1999 issue of Cold Facts magazine Millennium Breakthroughs A variety of CSA members give different perspectives on the past millennium: What were the most significant breakthroughs in cryogenics during the past millennium? Prof. R.G. Scurlock, Kryos Technology, scurlock@soton.ac.uk (“Breakthrough” = way through obstacles — Oxford English Dictionary)...
April 18, 2008
Cryo Central

Cryobiology

Andreas Sputtek Past President Society for Cryobiology sputtek@uke.uni-hamburg.de or http://www.sputtek.de/. The word cryobiology (from the Greek words “cryo” = cold, “bios” = life, and “logos” = science) literally signifies the science of life at low temperatures. In practice, this field comprises the study of any biological material or system (e.g.,...
April 18, 2008
Cryo Central

Cryogenic Insulation

James E. Fesmire Cryogenics Test Laboratory NASA Kennedy Space Center james.e.fesmire@nasa.gov Introduction In today’s world, the use of cryogenics and low-temperature refrigeration is taking a more and more significant role. From the food industry, transportation, energy, and medical applications to the Space Shuttle, cryogenic liquids must be stored, handled, and...
April 18, 2008
Latest in Ask the Experts
Ask the Experts

An Issue of Pressure and Flow Rate in a Supply Tank

Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...
April 20, 2018
Ask the Experts

Using MLI on VJ Line Joints or Cryo Storage Tanks

When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...
April 20, 2018