ADVERTISEMENT

CEC/ICMC 2017 Conference Recap

Nestled against the coast of lake Monona in Madison WI, over 700 scientists and engineers from around the world bustled around the meeting rooms of Frank Lloyd Wright’s Monona Terrace from July 9-13, 2017, for the 21st joint Cryogenic Engineering and International Cryogenic Materials Conferences.

Flaw Uncovered in Modern Cryogenic Two-phase Flow Modeling

An investigation into popular thermal/fluid design codes begun as an exercise in curiosity by engineers at NASA Glenn Research Center and the University of Florida has uncovered an interesting flaw in modern cryogenic two-phase flow modeling.

Liquid Air Energy Storage: How Cryogenics Can Support a Greener Grid

The LAES system charges using an industrial air liquefier based on the Claude cycle used on the front end of existing air separation units. Electricity from the grid is used to produce liquid air at close to ambient pressure, thus avoiding the excessive cost of containing a high-pressure fluid in...

Chart Acquires VCT Vogel

On September 1, Chart Industries, Inc. (CSA CSM) announced its acquisition of VCT Vogel GmbH, a German firm servicing cryogenic and other mobile gas tank equipment and trucks. Founded in 2001, VCT has established itself as a provider of truck-mounted drive and control systems for the operation of cryogenic pumps...

New Director General at ESO

Xavier Barcons became the eighth director general of the European Southern Observatory on September 1, succeeding Tim de Zeeuw who had served since 2007. Barcons begins his tenure at an exciting time for ESO, as construction of its Extremely Large Telescope is progressing and it is set to see first...

ADVERTISEMENT

Joule-Thomson Effect

The Joule-Thomson (JT) effect is a thermodynamic process that occurs when a fluid expands from high pressure to low pressure at constant enthalpy (an isenthalpic process). Such a process can be approximated in the real world by expanding a fluid from high pressure to low pressure across a valve. Under...

Current Leads

One of the challenges of using superconducting magnets is the connection of the magnet to a room temperature power supply. This is accomplished via current leads. The trick is that current leads should ideally have a low heat leak, since they connect room temperature to cryogenic temperature, while at the...

Multilayer Insulation

Multilayer insulation (also referred to as superinsulation) is a key component in the reduction of heat leak to cryogenic systems due to thermal radiation. MLI consists of a series of uncooled reflective surfaces placed in the vacuum space between two surfaces, one warmer than the other. Generally speaking, for ideal...

Magnetic Levitation

From http://www.superconductors.org. Magnetic-levitation is an application where superconductors perform extremely well. Transport vehicles such as trains can be made to “float” on strong superconducting magnets, virtually eliminating friction between the train and its tracks. Not only would conventional electromagnets waste much of the electrical energy as heat, they would have...

Superconductivity

From Superpower website. History of Superconductivity Superconductivity was discovered in 1911 by the Dutch physicist, Heike Kammerlingh Onnes when he was able to liquefy helium by cooling it to 4 Kelvin, or -452°F. This enabled him to cool other materials close to absolute zero and investigate their electrical properties. He...

Medical Applications of Cryogenics

Neutron Therapy Cryogenics is at the heart of nuclear accelerators. Accelerators such as Fermilab’s Tevatron make neutron therapy for cancer possible. From Fermilab Today 4/20/09: Fermilab currently offers neutron therapy. But staff at Fermilab designed and built the proton accelerator used by the nation’s first hospital-based treatment center to use...

Nuclear Physics

Al Zeller National Superconducting Cyclotron Lab (NSCL) at Michigan State University zeller@nscl.msu.edu Cryogenics has a long history in nuclear physics. The technology has its origins in the use of cold traps for maintaining a vacuum, which is required to prevent beam loss and for generating high voltages used in acceleration....

An Issue of Pressure and Flow Rate in a Supply Tank

Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...

Using MLI on VJ Line Joints or Cryo Storage Tanks

When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...