Nominations Open for New KEK Director-General
Japan's KEK, High Energy Accelerator Research Organization, has announced a worldwide search for its next Director-General, whose term will begin April 1, 2018, and last for three years.
ADVERTISEMENT
Winners Announced for 2017 Fritz London Memorial Prize
Duke University has announced recipients of its 2017 Fritz London Memorial Prize, choosing Jeevak Parpia of Cornell University and William P. Halperin and James A. Sauls, both from Northwestern University.
Boiloff Calorimetry for the Measurement of Very Low Heat Flows
The use of boiloff calorimetry to measure the effects of thermal energy (or heat) dates back to the early 1900s [1, 2]. Gas flow rates measured in evaporation—or boiloff—calorimetry enable direct calculation of quantities such as heat flux and thermal conductivity. A particularly useful approach is to use nitrogen for...
Remembering the 1987 Woodstock of Physics
Paul Michael Grant was in the room where it happened, and in this essay, he recalls the 1987 APS March Meeting known as the "Woodstock of Physics." It began when Brian Maple, of UC San Diego, took the unprecedented and ambitious step of assembling an “off the program” all night...
Women in Cryogenics and Superconductivity
CSA celebrates women in cryogenics and superconductivity. In this feature, six women in positions across the industry discuss current projects, how they entered the field and their thoughts on attracting more women to the profession.
Cryogenic Sapphire Oscillator Enhancement Improves Accuracy
Researchers from the University of Adelaide in South Australia have enhanced the Cryogenic Sapphire Oscillator, or Sapphire Clock, to allow time measurements with accuracy on the femtosecond scale. The oscillator has a five-centimeter cylinder-shaped sapphire crystal cooled to about -267°C, or about five or six degrees above absolute zero. At...
ADVERTISEMENT
Stability
Stability refers to the ability of a device employing superconductors to remain in its superconducting state after part of the superconductor transitions back to its normal conducting state due to a disturbance. While the concept can apply to many superconducting devices—transmission lines, generators, motors, etc.—it is most commonly considered in...
Cable-in-Conduit Conductors
Cable-in-Conduit Conductors (CICC) are a common form of superconducting cable used in large-scale applications. There are several varieties of CICCs, but they all consist of many small, stabilized superconducting wires contained within a conduit through which a coolant (typically supercritical He II) flows. Figure 1 shows the cross section of...
Bayonet Coupling
A bayonet coupling is a demountable joint that allows for quick and easy connection and disconnection of cryogenic components, including transfer lines, cryostats, liquefiers and refrigerators. Bayonets provide a number of advantages, chief among them the ability to connect and disconnect the bayonets while components they connect are still at...
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Suppliers of regenerator materials
I was looking for suppliers of regenerator materials. Can you please provide a list of vendors for: • Lead spheres • Bronze screen discs • Rare earth materials and spheres Thank you in advance for any help you can provide.
Containing ice accumulation while recovering helium
We are implementing a system to recover helium from our Janis ST-500 continuous flow LHe cryostat. The recovery system uses standard 1/4″ plastic tubing, which we connect directly to the cryostat’s exhaust port. The problem with this setup is that the gas is still quite cold as it leaves the...
Looking for some advice regarding cryogenic modeling in ANSYS FEA software
I am looking for some advice regarding cryogenic modeling in ANSYS FEA software. I have been trying to use the Transient Thermal module, in workbench 14.5, to model the cooling of a device in a dilution fridge. I have approximate values for the cooling power of each plate in the...
Compensators and/or accumulators: Are they used in cryogenics?
Are compensators and/or accumulators, high or low pressure, used in cryogenics? Are they used in space?