ADVERTISEMENT

After 50 Years of ASC and Magnet Conductors, What’s Next?

Past and present superconducting magnet technology suggests that cheap, strong, available-by-the-ton Nb-Ti alloy conductors will always be used unless it’s absolutely necessary to use another superconducting material. In this decade “absolutely necessary” has taken on a clearer definition, thanks to ITER, the upgrade of LHC, 1 GHz NMR magnets, the...

Laser Powered Cryocooling Drops to 91 K

Over the last couple of decades researchers around the world have been working on optical refrigeration, a new solid-state cooling scheme based on light-matter interactions, and a team of researchers from the University of New Mexico (UNM) and ThermoDynamic Films, LLC (TDF) is currently working to harness the physics of...

Testing JWST’s MIRI Cooler Compressor Assembly

The James Webb Space Telescope’s (JWST) Mid InfraRed Instrument (MIRI) cooler subsystem features a closed cycle helium Joule-Thomson (JT) cryocooler pre-cooled by a three-stage pulse tube cryocooler. In this paper, researchers from Northrop Grumman discuss tests conducted on the CCA, a flight model sub-assembly that compresses and precools MIRI's helium...

Cryogenic System to Cool Malaysian Data Center

An international consortium has announced plans to construct a green data center that features liquid submersion cooling at a location in Malaysia's Klang Valley. The project aims to increase the sustainability of data centers by changing the way facilities are cooled, therein reducing energy consumption by up to 50 percent,...

Fine-Tuned Cryogenic Clock Improves Computing Capabilities

Researchers from the University of Adelaide in South Australia have enhanced the cryogenic sapphire clock to achieve near attosecond capability. Also known as a microwave oscillator, the clock features a five cm cylinder-shaped crystal cooled to -269°C.

New Graphene Hybrid Exceeds DOE Goal for Hydrogen Storage

Layers of graphene separated by nanotube pillars of boron nitride may be a suitable material to store hydrogen fuel in cars, according to a new computational study from Rice University published in the journal Langmuir. The material held 14.77 percent of its weight in hydrogen at -321°F, exceeding both current...

ADVERTISEMENT

Joule-Thomson Effect

The Joule-Thomson (JT) effect is a thermodynamic process that occurs when a fluid expands from high pressure to low pressure at constant enthalpy (an isenthalpic process). Such a process can be approximated in the real world by expanding a fluid from high pressure to low pressure across a valve. Under...

Current Leads

One of the challenges of using superconducting magnets is the connection of the magnet to a room temperature power supply. This is accomplished via current leads. The trick is that current leads should ideally have a low heat leak, since they connect room temperature to cryogenic temperature, while at the...

Multilayer Insulation

Multilayer insulation (also referred to as superinsulation) is a key component in the reduction of heat leak to cryogenic systems due to thermal radiation. MLI consists of a series of uncooled reflective surfaces placed in the vacuum space between two surfaces, one warmer than the other. Generally speaking, for ideal...

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Seeking recommendations for commercial sensors

I would like to measure vibrations in small LHe cryostats. Could anybody recommend commercial sensors which would be suitable for the purpose? I am interested in the frequency range between 1Hz and a couple of KHz, with particular attention to the low frequency side.

Estimating cost of carbon steel, pure helium storage tanks

In order to perform an indicative cost assessment of our helium cryogenic plant (still in the design phase), I need an estimation of the cost of carbon steel room temperature pure helium storage tanks. The storage pressure is 20 bar. Can anyone give me suggestions about how to estimate the...

Supplier of pressure sensor that works down to 4.2 K

In an actual experiment we would like to measure the static pressure in a cryostat in the range between one and four bar. Therefore we are looking for some (more or less) cheap pressure sensors that work in liquid helium in the pressure range up to five bar. Unfortunately all...

Looking for reference/textbook suggestions

Can you suggest some reference textbooks for practical thermodynamics applications in cryogenic fields? I need textbooks with cryogenics calculations and examples, dimensioning procedures, second principle applications in cryogenics, heat load calculations, cryogenic pump application, etc. Do such books exist? Does any similar source of information exist?