ADVERTISEMENT

ASC 2016 Highlights Progress in Superconductivity

Over 1,600 researchers and engineers from 36 countries gathered in Denver September 4-9 for ASC 2016, attending plenaries, poster sessions and meetings under the watchful gaze of the Colorado Convention Center’s Blue Bear. Celebrating its 50th year, the conference covered a wide range of topics, from superconducting electronics detectors and...

2016 ASC Best Student Paper Contest

The Applied Superconductivity Conference's Best Student Paper Contest recognizes outstanding presentations made at ASC by full-time students. The ability to describe one’s research, by succinctly capturing key results and ideas in written form as well as by presenting and defending the work in front of an audience of experts, is...

After 50 Years of ASC and Magnet Conductors, What’s Next?

Past and present superconducting magnet technology suggests that cheap, strong, available-by-the-ton Nb-Ti alloy conductors will always be used unless it’s absolutely necessary to use another superconducting material. In this decade “absolutely necessary” has taken on a clearer definition, thanks to ITER, the upgrade of LHC, 1 GHz NMR magnets, the...

Laser Powered Cryocooling Drops to 91 K

Over the last couple of decades researchers around the world have been working on optical refrigeration, a new solid-state cooling scheme based on light-matter interactions, and a team of researchers from the University of New Mexico (UNM) and ThermoDynamic Films, LLC (TDF) is currently working to harness the physics of...

Testing JWST’s MIRI Cooler Compressor Assembly

The James Webb Space Telescope’s (JWST) Mid InfraRed Instrument (MIRI) cooler subsystem features a closed cycle helium Joule-Thomson (JT) cryocooler pre-cooled by a three-stage pulse tube cryocooler. In this paper, researchers from Northrop Grumman discuss tests conducted on the CCA, a flight model sub-assembly that compresses and precools MIRI's helium...

Cryogenic System to Cool Malaysian Data Center

An international consortium has announced plans to construct a green data center that features liquid submersion cooling at a location in Malaysia's Klang Valley. The project aims to increase the sustainability of data centers by changing the way facilities are cooled, therein reducing energy consumption by up to 50 percent,...

ADVERTISEMENT

Stability

Stability refers to the ability of a device employing superconductors to remain in its superconducting state after part of the superconductor transitions back to its normal conducting state due to a disturbance. While the concept can apply to many superconducting devices—transmission lines, generators, motors, etc.—it is most commonly considered in...

Cable-in-Conduit Conductors

Cable-in-Conduit Conductors (CICC) are a common form of superconducting cable used in large-scale applications. There are several varieties of CICCs, but they all consist of many small, stabilized superconducting wires contained within a conduit through which a coolant (typically supercritical He II) flows. Figure 1 shows the cross section of...

Bayonet Coupling

A bayonet coupling is a demountable joint that allows for quick and easy connection and disconnection of cryogenic components, including transfer lines, cryostats, liquefiers and refrigerators. Bayonets provide a number of advantages, chief among them the ability to connect and disconnect the bayonets while components they connect are still at...

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Power usage: cryogenic systems vs. regular refrigerators

A recent project highlighted to me that closed cycle cryogenic cooling systems use far more electrical power to reduce temperatures by a few watts than regular refrigerators. I am sure it must be something to do with the extra difficulty of removing the heat from the liquid nitrogen or similar...

Redundancy strategies for mechanical -80C freezers

I was wondering what kind of redundancy strategies are people using for their mechanical -80C freezers? I am aware of the following. Please add if you are doing something different. 1) 1 Backup freezer for every 10 freezers – Empty and maintained at -80C at all times 2) Backup C02...

Method to move components in a cryogenic environment

Does anyone know of a method with which to reliably move components in a cryogenic environment? We are interested in moving detectors in a cryogenically cooled (2K) vacuum chamber, which is contained within a larger cryostat/isolation vacuum with thermal shields. As the desired horizontal or vertical displacement is between 10...