ADVERTISEMENT

LHC Restarted, Researchers Eye 2,700 Bunches per Beam

The Large Hadron Collider (LHC) resumed operations on March 25 when CERN researchers opened its doors to allow particles to travel around the ring for the first time since the year-end technical stop (YETS) began in December 2015. Several updates and interventions took place in LHC accelerators and beamlines during...

LCLS-II Upgrade Will Boost Power of World’s Brightest X-ray Laser

Construction is underway on a major upgrade to LCLS (Linac Coherent Light Source), a unique X-ray laser at the Department of Energy’s SLAC National Accelerator Laboratory. The project, known as LCLS-II, will add a second X-ray laser beam that’s 10,000 times brighter, on average, than the first one and fires...

NASA Completes JWST Cryogenic Testing

NASA researchers have completed cryogenic testing on the science instruments module for the James Webb Space Telescope (JWST). The module contains JWST's science cameras and spectrographs, and had been undergoing four months of monitoring inside a giant thermal vacuum chamber called the Space Environment Simulator (SES) at NASA's Goddard Space...

NASA Scientists Prepare Cold Atom Laboratory for ISS Mission

On a sun-drenched hill in Southern California's San Gabriel Mountains, researchers at NASA's Jet Propulsion Laboratory in Pasadena are making progress on an experimental facility that could create the coldest known place in the universe. It's called the Cold Atom Laboratory (CAL) and is expected to probe the wonders of...

FabLab, a STEM Show for Teen Girls, Launches on FOX

FabLab, a new science television series from the producers of the Teen Choice Awards, has launched on FOX. The show aims to enthuse tween and teen girls about STEM by drawing connections between STEM innovations and efforts to make the world a better place. FabLab is produced in partnership with...

ADVERTISEMENT

Dewar

A dewar is a type of cryostat named after Sir James Dewar, the researcher who first developed the concept of a vacuum insulated container with silvered walls to reflect thermal radiation. Dewar was the first to liquefy hydrogen, and he created the device to store his discovery. The thermos bottle...

Stirling and Gifford-McMahon Cryocoolers

Stirling and Gifford-McMahon (GM) cryocoolers are two of the most commonly used cryocoolers in cryogenics. Both devices have a significant industrial base and operate at a wide range of temperatures and capacities. The thermodynamic cycles for both of these cryocoolers are quite similar. The Stirling cycle consists of a compressor,...

Liquefied Natural Gas (LNG)

A significant commercial application of cryogenics is the liquefaction, transport and storage of natural gas. Liquefied Natural Gas (LNG) is generally 95 percent methane with a few percent ethane and much lower concentrations of propane and butane. LNG liquefies at 111.6 K. Unlike many applications of cryogenics, the motivation for...

Food Processing

Cryogenics and Food The industrial gas industry provides a host of products and services related to food. The various gases have useful and sometimes fascinating applications in food industry. “The food industry is not a homogenous industry. The needs of customers processing hamburger vs. poultry vs. strawberries vs. seafood, for...

Primary Standards

Elie K. Track Hypres, Inc. elie@hypres.com http://www.hypres.com/ Primary standards involve the exact definition and realization of units of measurement for various quantities, time, length, mass, voltage, resistance, current, etc. International agreements based on the latest scientific knowledge define those units, and their realizations vary depending on the unit itself. For...

Shrink Fitting

Robin A. Rhodes Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Shrink fitting, (or “compression fitting” as it is sometimes called), is a method used to insert a pin or bushing into a housing or other assembly requiring an extremely tight tolerance fit. It can be used as an alternative to...

Telecommunications

From the Winter 2004 issue of Cold Facts magazine The recent M-Calc IV — 4th Industry Assessment workshop discussing military and commercial applications for low-cost cryocoolers, held in November in San Diego, highlighted progress being made in cryogenics as applied in telecommunications. The reliability and long lifetime of projects now...

Presence of alloying elements in tool steels

I want to expand my knowledge of cryogenics in general and tool steels in particular. Specifically, I am keenly interested in learning about the presence of alloying elements in tool steels and how their presence in various combinations affects the performance of tool steels after cryogenic treatment.

Pros and cons of barcoding samples

I was wondering if I could ask for input on pros and cons of barcoding. We are in the process of trying to decide if we should start barcoding our samples and I’m just not sure if this is feasible for our organization. We have numerous sites all over the...