PIP-II to Advance Intense Particle Beam Physics
With the power of Proton Improvement Plan-II, Fermi National Accelerator Laboratory is planning to construct and operate the foremost facility in the world for particle physics utilizing intense beams.
ADVERTISEMENT
Pump Design and Operation Tips from DH Industries
Pumps and their efficiencies will increase the heat load of a closed loop cryogenic cooling system, so it is important that these pumps be as efficient as possible to minimize cost and supply use. Francesco Dioguardi, Martijn Donkers and Harrie Vermeulen of DH Industries provide pump design and operation tips...
Development of HTS CORC Cables for High Field Magnets and Advanced Power Transmission
Dr. Danko van der Laan, the 2014 Roger W. Boom awardee, discusses the development of high temperature superconductors (HTS) and their applications in high field magnets and advanced power transmission. He also explains an approach to cable ReBCO tapes called Conductor on Round Core (CORC™) cables, which feature layers of...
Superconductivity record bolstered by magnetic data
Nature reports that scientists in Germany have observed the common molecule hydrogen sulfide superconducting at a record-breaking 203K (-70°C) when subjected to very high pressures. Researchers A. P. Drozdov, M. I. Eremets, I. A. Troyan, V. Ksenofontov and S. I. Shylin report their findings in their paper "Conventional superconductivity at...
JSAP publishes inaugural issue of the JSAP Bulletin
The Japan Society of Applied Physics (JSAP) has published the first issue of the new JSAP Bulletin, a tri-annual online publication designed to highlight JSAP's activities and inspire a global audience engaged in academic and industrial research.
Fermilab Accelerator Division demonstrates Booster Neutrino Beamline operations
After five months of repairing and retooling the Booster Neutrino Beamline (BNB), members of the Accelerator Division at Fermi National Accelerator Laboratory successfully delivered beam to the BNB on June 22. The previous horn, BNB-2, was found to be inoperable in January when it was determined its cooling was no...
ADVERTISEMENT
Regenerators
Regenerators or regenerative heat exchangers are a key component of cryocoolers such as pulse tube cryocoolers (Cold Facts, August 2014). Regenerator performance greatly affects the coefficient of performance of cryocoolers. Improvements in regenerator design and, in particular, regenerator materials have been an important factor in the improvement of the performance...
Pulse Tube Cryocoolers
The development of pulse tube cryocoolers has been a significant topic of research and development over the past 20 or so years. Pulse tube cryocoolers have a number of advantages over other types of cryocoolers and are now available commercially. In order to understand pulse tube cryocoolers, it’s best to...
Thermal Expansion
Thermal expansion refers to the change in size (length or volume) that a material undergoes as its temperature changes. In cryogenic systems this effect can be quite large and must be allowed for in the design. In isotropic materials, which include most engineering materials, the thermal expansion is the same...
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Resistance to embrittlement at low temperatures
Could anyone advise me about resistance to embrittlement at low temperatures for the alloys in subject, i.e. does the CF10M perform like the CF8M in the same cryogenic service (-215F)? Amara Maafi Amara.Maafi@bg-group.com
Need help with temperature dependent model
I am a fourth-year student at New Zealand University. My name is Xu Ke. I have a project to generate a temperature dependent model for inductor, capacitor and diode by using PLECS. PLECS is software which acts as a toolbox for MATLAB. In my models, the temperature is very low,...
In what form is water available in LN2?
Does anybody know in what form water is available in LN2? There probably is a block of ice in the bottom of the tank. But as water comes in many shapes, I can imagine snow or crystals floating free in the LN2. When water is available in LN2, could small...
Separating gases using cryogenics
We are looking for some consulting engineers who understand how to separate gases using cryogenics. We have a new process which takes biomass and converts it to 5 gases and we need to separate these gases into their pure forms. Thanks for your help. Malcolm Draper Energy Research Group LLC...