ADVERTISEMENT

Used MRI magnets get a second chance at life in high energy physics experiments

Researchers at the US Department of Energy's Argonne National Laboratory recently acquired two decommissioned magnets from magnetic resonance imaging (MRI) scanners from hospitals in Minnesota and California that will find a new home as proving grounds for instruments used in high energy and nuclear physics experiments. The two new magnets...

Physicist Peter Winter wins DOE Early Career Award

High energy physicist Peter Winter of the US Department of Energy's (DOE) Argonne National Laboratory has received a DOE Early Career Award, a prestigious five-year research grant totaling $2.5 million. The grant will help to fund Winter's contributions to the muon g-2 experiment currently being assembled at Fermi National Accelerator...

NASA issues request for information on Stirling power systems

NASA’s Science Mission Directorate is seeking information on Stirling power systems and technologies that could be developed into a space-based power system that would provide between 100-500 Watts of electricity for future deep space missions. In partnership with the Department of Energy, a Request for Information (RFI) posted on June...

X-ray ptychography, fluorescence microscopy combo sheds new light on trace elements

Using the Advanced Photon Source, a US Department of Energy Office of Science User Facility at Argonne National Laboratory (CSA Corporate Sustaining Member), a team of researchers demonstrated unparalleled sensitivity for measuring the distribution of trace elements in thicker specimens at cryogenic temperatures, in this case at about -260°F. They...

Toward a resolution of the proton form factor problem

In the paper "Towards a Resolution of the Proton Form Factor Problem: New Electron and Positron Scattering Data" published in Physical Review Letters, D. Adikaram et al. report findings that may resolve a puzzle that has confounded physicists for the last decade: the baffling discrepancy between measurements of two different...

MIT team creates ultracold molecules

Experimental physicists at MIT have successfully cooled molecules in a gas of sodium potassium (NaK) to a temperature of 500 nanokelvins, inducing the strongest dipoles in ultracold molecules yet. Their findings, published in Physical Review Letters, support the possibility that molecules may start to exhibit exotic states of matter at...

ADVERTISEMENT

Dewar

A dewar is a type of cryostat named after Sir James Dewar, the researcher who first developed the concept of a vacuum insulated container with silvered walls to reflect thermal radiation. Dewar was the first to liquefy hydrogen, and he created the device to store his discovery. The thermos bottle...

Stirling and Gifford-McMahon Cryocoolers

Stirling and Gifford-McMahon (GM) cryocoolers are two of the most commonly used cryocoolers in cryogenics. Both devices have a significant industrial base and operate at a wide range of temperatures and capacities. The thermodynamic cycles for both of these cryocoolers are quite similar. The Stirling cycle consists of a compressor,...

Liquefied Natural Gas (LNG)

A significant commercial application of cryogenics is the liquefaction, transport and storage of natural gas. Liquefied Natural Gas (LNG) is generally 95 percent methane with a few percent ethane and much lower concentrations of propane and butane. LNG liquefies at 111.6 K. Unlike many applications of cryogenics, the motivation for...

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

An Issue of Pressure and Flow Rate in a Supply Tank

Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...

Using MLI on VJ Line Joints or Cryo Storage Tanks

When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...