ADVERTISEMENT

Danko van der Laan receives 2014 Boom Award

The Roger W. Boom Award is given bi-annually to a young professional under 40 years of age who shows promise for making significant contributions to the fields of cryogenic engineering and applied superconductivity. This year, the award was presented to Dr. Danko van der Laan during an awards ceremony on...

Tips for Success When Using an ADR Cryostat

Following up on his discussion in the Fall 2013 issue of Cold Facts on when an Adiabatic Demagnetization Refrigerator (ADR) cryostat is the right tool for the job, Charlie Danaher provides useful technical tips on how to effectively use an ADR.

Young Faces: The Next Generation in Cryogenics, Part I

In the Summer 2006 issue of Cold Facts, we debuted a feature story about outstanding young professionals who are active in the cryogenics industry. This year, we again asked the cryogenics community for the names of up-and-coming "young faces." Here is Part I of the third installment of Young Faces,...

BICEP2 and the Outer Edge of the Universe

The first BICEP (Background Imaging of Cosmic Extragalactic Polarization), BICEP1, observed with 49 spider-web bolometers for three years. BICEP2 carried 256 dual polarization transition-edge superconducting detectors of greatly increased sensitivity, and also observed for three years. Dr. Peter Mason reports here on the results of these two instruments and their...

ADVERTISEMENT

Joule-Thomson Effect

The Joule-Thomson (JT) effect is a thermodynamic process that occurs when a fluid expands from high pressure to low pressure at constant enthalpy (an isenthalpic process). Such a process can be approximated in the real world by expanding a fluid from high pressure to low pressure across a valve. Under...

Current Leads

One of the challenges of using superconducting magnets is the connection of the magnet to a room temperature power supply. This is accomplished via current leads. The trick is that current leads should ideally have a low heat leak, since they connect room temperature to cryogenic temperature, while at the...

Multilayer Insulation

Multilayer insulation (also referred to as superinsulation) is a key component in the reduction of heat leak to cryogenic systems due to thermal radiation. MLI consists of a series of uncooled reflective surfaces placed in the vacuum space between two surfaces, one warmer than the other. Generally speaking, for ideal...

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Assistance with resolving a sealing problem?

We are fabricating piping components for refrigeration service. These components must be leak checked at 15 bar (218 psig). We are using a gas test media that is 25% helium and experiencing difficulty on maintaining a seal on the flanged connections. Do you know anyone or any references that could...

Cryogenic data on leather and nomex

Could anyone please help me out with the following cryogenics data: Leather — mechanical properties at 77 K or lower Nomex — thermal conductivity @ 4 to 50 K I lost the data I had some time ago and although this should be easily accessible, I can’t find any reference...