Promising New Sources of Helium
Dr. John Barclay and Raymond Hobbs report on the US's helium supply and use.
ADVERTISEMENT
CSA board certifies newly elected directors
At the August 14 CSA Board meeting held during the Applied Superconductivity Conference in Charlotte NC, the four directors recently elected by the society’s membership were certified.
Danko van der Laan receives 2014 Boom Award
The Roger W. Boom Award is given bi-annually to a young professional under 40 years of age who shows promise for making significant contributions to the fields of cryogenic engineering and applied superconductivity. This year, the award was presented to Dr. Danko van der Laan during an awards ceremony on...
Tips for Success When Using an ADR Cryostat
Following up on his discussion in the Fall 2013 issue of Cold Facts on when an Adiabatic Demagnetization Refrigerator (ADR) cryostat is the right tool for the job, Charlie Danaher provides useful technical tips on how to effectively use an ADR.
Young Faces: The Next Generation in Cryogenics, Part I
In the Summer 2006 issue of Cold Facts, we debuted a feature story about outstanding young professionals who are active in the cryogenics industry. This year, we again asked the cryogenics community for the names of up-and-coming "young faces." Here is Part I of the third installment of Young Faces,...
Cold Facts Columnists Bring Their Unique Perspectives on Cryogenics
Over the years, Cold Facts has been privileged to have published informed, thoughtful and innovative columns by a series of leaders in the cryogenics industry. Here’s a look back at some of the highlights of the past and a review of our present contributors.
ADVERTISEMENT
Dewar
A dewar is a type of cryostat named after Sir James Dewar, the researcher who first developed the concept of a vacuum insulated container with silvered walls to reflect thermal radiation. Dewar was the first to liquefy hydrogen, and he created the device to store his discovery. The thermos bottle...
Stirling and Gifford-McMahon Cryocoolers
Stirling and Gifford-McMahon (GM) cryocoolers are two of the most commonly used cryocoolers in cryogenics. Both devices have a significant industrial base and operate at a wide range of temperatures and capacities. The thermodynamic cycles for both of these cryocoolers are quite similar. The Stirling cycle consists of a compressor,...
Liquefied Natural Gas (LNG)
A significant commercial application of cryogenics is the liquefaction, transport and storage of natural gas. Liquefied Natural Gas (LNG) is generally 95 percent methane with a few percent ethane and much lower concentrations of propane and butane. LNG liquefies at 111.6 K. Unlike many applications of cryogenics, the motivation for...
Primary Standards
Elie K. Track Hypres, Inc. elie@hypres.com http://www.hypres.com/ Primary standards involve the exact definition and realization of units of measurement for various quantities, time, length, mass, voltage, resistance, current, etc. International agreements based on the latest scientific knowledge define those units, and their realizations vary depending on the unit itself. For...
Shrink Fitting
Robin A. Rhodes Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Shrink fitting, (or “compression fitting” as it is sometimes called), is a method used to insert a pin or bushing into a housing or other assembly requiring an extremely tight tolerance fit. It can be used as an alternative to...
Telecommunications
From the Winter 2004 issue of Cold Facts magazine The recent M-Calc IV — 4th Industry Assessment workshop discussing military and commercial applications for low-cost cryocoolers, held in November in San Diego, highlighted progress being made in cryogenics as applied in telecommunications. The reliability and long lifetime of projects now...
Wind Tunnels
Dr. Robert Kilgore The development of the cryogenic wind tunnel is one of many significant breakthroughs in both cryogenics and wind-tunnel technology made during the past millennium. Interest in the development of high-speed commercial and military aircraft resulted in a review of problems of flow simulation in transonic wind tunnels...
Power usage: cryogenic systems vs. regular refrigerators
A recent project highlighted to me that closed cycle cryogenic cooling systems use far more electrical power to reduce temperatures by a few watts than regular refrigerators. I am sure it must be something to do with the extra difficulty of removing the heat from the liquid nitrogen or similar...
Redundancy strategies for mechanical -80C freezers
I was wondering what kind of redundancy strategies are people using for their mechanical -80C freezers? I am aware of the following. Please add if you are doing something different. 1) 1 Backup freezer for every 10 freezers – Empty and maintained at -80C at all times 2) Backup C02...
Safety guidelines for handling cryo vessels of nitrogen
I am looking for any safety guidelines for handling cryogenic vessels of nitrogen indoors and outdoors. I am especially interested in recommendations for area monitors to detect leaks, flow detection devices, etc.
Method to move components in a cryogenic environment
Does anyone know of a method with which to reliably move components in a cryogenic environment? We are interested in moving detectors in a cryogenically cooled (2K) vacuum chamber, which is contained within a larger cryostat/isolation vacuum with thermal shields. As the desired horizontal or vertical displacement is between 10...