Ready to launch the prototype: HTS current leads for ITER
High Temperature Superconductor (HTS) current leads are the components that transmit the large currents from room-temperature power supplies to very low-temperature superconducting coils.
ADVERTISEMENT
High-tech storage holds the key to preserving plant life
About half the world's plant species are estimated to be under threat of extinction, and Australia is home to 14 percent of them. It is now hoped a cryogenic storage unit can protect Australia's native plants forever.
Bestobell supplies valves for first US LNG flag vessel
The first US flag vessel to be operated on liquefied natural gas uses valves supplied by Bestobell Valves (CSA CSM). Globe and check valves were supplied as part of the LNGPac fuel system through the company’s preferred supplier agreement with Wärtsilä Gas Power Systems (GPS).
Scientists create first computer-designed superconductor
A Binghamton University scientist and his international colleagues report on the successful synthesis of the first superconductor designed entirely on the computer. Their findings were published in Physical Review Letters.
Higgs, Englert Win Nobel for Particle Mass Discoveries
On October 8 François Englert of Belgium and Peter Higgs of Britain were awarded the 2013 Nobel Prize in physics for their theoretical discoveries on how subatomic particles acquire mass.
VIDEO: A guided tour around the CLIC test facility
The Compact Linear Collider (CLIC) is a study for a future accelerator that will reach unprecedented energies for electrons and their antimatter twins, positrons.
ADVERTISEMENT
Refrigerators and Liquefiers
Two of the most common terms used in cryogenics are “refrigerator” and “liquefier.” These terms describe similar and, as will be seen, in some cases identical components. A refrigerator provides cooling (that is, absorbs heat) at cryogenic temperatures. Refrigerators typically put a working fluid (such as helium) through one of...
Air Separation
Air separation is one of the largest, as well as earliest, industrial applications of cryogenics. In this process, cryogenic temperatures are used to separate air into its constituent gases: nitrogen (78.08%), oxygen (20.95%), argon (0.93%) and carbon dioxide (0.3%). Trace gases such as krypton, neon, xenon and helium total far...
Coefficient of Performance and Figure of Merit
The coefficient of performance (COP) is used to describe the effectiveness of refrigerators, including those operating at cryogenic temperatures. The COP is defined as the amount of heat removed at the cryogenic operating temperature of the refrigerator divided by the amount of work that must be applied to remove the...
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Benefit of cryotreatment of audio circuit boards and interconnecting cables
Does cryotreatment of audio circuit boards and interconnecting cables (copper, silver, gold) properly done, provide a permanent benefit?
Standards and codes for design of cryogenic equipment?
What standards and codes are used in the design of cryogenic equipment?
Cryogenic thermophysical property data
I am in search of information regarding cryogenic thermophysical property data, specifically, Thermal Conductivity, Thermal Expansion, Stiffness and Modulus, in the 20K range. My list of materials include: Ti-6AL-4V (ELI), Al 6061-T651, and Invar (36%, plus any other composition which might have data available). Other materials which would be helpful...
Issue with insulation for ventilation system
I am with the Goodrich Corporation, an Aerospace products manufacturer. We currently utilize a number of environmental chambers (LN2 based) for environmental type conformity testing.