Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

The Next Niobium Goal: Medium-Field SRF Cavities with High Quality Factor

In his guest column, Dr. Lance Cooley writes, "We are now beginning to evolve our present knowledge about producing high-gradient cavities to take on goals of high-Q CW cavities. The starting point for this transition is clearly to explore simple adaptations of the present ILC process. But it is not...

American College of Cryosurgery Holds Annual Meeting

The American College of Cryosurgery, founded in 1977, hosted its first meeting January 2-7, 2013, after a hiatus of nearly ten years. The meeting venues provided a unique experience for participants and accompanying guests. A land-based session was held at the Hyatt Regency Downtown Miami Hotel.

Donnelly Team Designs Cryogenic Remediation of Power Pollutants

Professor John M. Pfotenhauer writes, "The fields of low temperature physics and energy and environment do not frequently interact. Imagine my astonishment to find in the 2010 spring edition of a newsletter from the Department of Physics at my graduate school, the University of Oregon, that my thesis advisor from...

Cryo Community Mourns Donna Jung, International Cryogenics

It is with great regret that we report the sudden death of Donna Jung, President of International Cryogenics, on February 1, 2013. Jung was a leader in the cryogenic community, president of a longtime CSA Corporate Sustaining Member company, and a stalwart supporter of the Society. Jung, 52, was one...

New question in “Ask the Experts”: Design length of transition tubes

The question is: Are there any rules of thumb for the design length of transition tubes in order to prevent condensation at the room temperature end?

Rules of thumb for the design length of transition tubes

Are there any rules of thumb for the design length of transition tubes in order to prevent condensation at the room temperature end? By “transition tube,” I mean some standard size (O.D. and wall thickness) type 304 stainless steel tube with either 4 K or 80 K at one end...

Latest in Defining Cryogenics

Regenerators

Regenerators or regenerative heat exchangers are a key component of cryocoolers such as pulse tube cryocoolers (Cold Facts, August 2014). Regenerator performance greatly affects the coefficient of performance of cryocoolers. Improvements in regenerator design and, in particular, regenerator materials have been an important factor in the improvement of the performance...

Pulse Tube Cryocoolers

The development of pulse tube cryocoolers has been a significant topic of research and development over the past 20 or so years. Pulse tube cryocoolers have a number of advantages over other types of cryocoolers and are now available commercially. In order to understand pulse tube cryocoolers, it’s best to...

Thermal Expansion

Thermal expansion refers to the change in size (length or volume) that a material undergoes as its temperature changes. In cryogenic systems this effect can be quite large and must be allowed for in the design. In isotropic materials, which include most engineering materials, the thermal expansion is the same...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

Resistance to embrittlement at low temperatures

Could anyone advise me about resistance to embrittlement at low temperatures for the alloys in subject, i.e. does the CF10M perform like the CF8M in the same cryogenic service (-215F)? Amara Maafi Amara.Maafi@bg-group.com

Need help with temperature dependent model

I am a fourth-year student at New Zealand University. My name is Xu Ke. I have a project to generate a temperature dependent model for inductor, capacitor and diode by using PLECS. PLECS is software which acts as a toolbox for MATLAB. In my models, the temperature is very low,...

In what form is water available in LN2?

Does anybody know in what form water is available in LN2? There probably is a block of ice in the bottom of the tank. But as water comes in many shapes, I can imagine snow or crystals floating free in the LN2. When water is available in LN2, could small...

Separating gases using cryogenics

We are looking for some consulting engineers who understand how to separate gases using cryogenics. We have a new process which takes biomass and converts it to 5 gases and we need to separate these gases into their pure forms. Thanks for your help. Malcolm Draper Energy Research Group LLC...

CATEGORIES