Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

NIST cryogenic radiometer simplifies measurements

The National Institute of Standards and Technology (NIST) has demonstrated a novel chip-scale instrument made of carbon nanotubes that may simplify absolute measurements of laser power, especially the light signals transmitted by optical fibers in telecommunications networks.

First three-year LHC running period reaches a conclusion

At 7:24 am on February 14, the shift crew in the CERN Control Center extracted the beams from the Large Hadron Collider, bringing the machine’s first three-year running period to a successful conclusion. The LHC’s first run has seen major advances in physics, including the discovery of a new particle...

Steven Chu steps down as US energy secretary

The Nobel laureate Steven Chu has announced he is to resign as US energy secretary. When Chu departs, he will have served in the post for four years – longer than any of the 14 previous heads of the Department of Energy (DOE). Chu now plans to return to "an...

Foam’s future seen in space and industry

Materials designed with specialized thermal properties have been integral components of NASA's space shuttles and other launch vehicles for many years. Now, two thermal insulation systems developed by scientists at the Cryogenics Test Laboratory (CTL), a CSA Corporate Sustaining Member, at NASA's Kennedy Space Center in Florida may have application...

TEPCO to buy 800,000 tonnes of LNG from US

Gulfnews.com reports that the operator of Japan’s crippled Fukushima nuclear power station said Wednesday it plans to buy 800,000 tonnes of light liquefied natural gas (LNG) annually from the United States as it looks to cut its fuel bills. Tokyo Electric Power (TEPCO) said it had agreed to buy 400,000...

US conductor fabrication for ITER

US ITER and its vendors are moving into a new fabrication phase for the project's toroidal field magnet system. Cabling and conductor fabrication are now underway in New Hampshire and Florida for the niobium-tin wire produced in the US. All of this fabrication effort is in preparation for delivering the...

Latest in Defining Cryogenics

Joule-Thomson Effect

The Joule-Thomson (JT) effect is a thermodynamic process that occurs when a fluid expands from high pressure to low pressure at constant enthalpy (an isenthalpic process). Such a process can be approximated in the real world by expanding a fluid from high pressure to low pressure across a valve. Under...

Current Leads

One of the challenges of using superconducting magnets is the connection of the magnet to a room temperature power supply. This is accomplished via current leads. The trick is that current leads should ideally have a low heat leak, since they connect room temperature to cryogenic temperature, while at the...

Multilayer Insulation

Multilayer insulation (also referred to as superinsulation) is a key component in the reduction of heat leak to cryogenic systems due to thermal radiation. MLI consists of a series of uncooled reflective surfaces placed in the vacuum space between two surfaces, one warmer than the other. Generally speaking, for ideal...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

Power usage: cryogenic systems vs. regular refrigerators

A recent project highlighted to me that closed cycle cryogenic cooling systems use far more electrical power to reduce temperatures by a few watts than regular refrigerators. I am sure it must be something to do with the extra difficulty of removing the heat from the liquid nitrogen or similar...

Redundancy strategies for mechanical -80C freezers

I was wondering what kind of redundancy strategies are people using for their mechanical -80C freezers? I am aware of the following. Please add if you are doing something different. 1) 1 Backup freezer for every 10 freezers – Empty and maintained at -80C at all times 2) Backup C02...

Safety guidelines for handling cryo vessels of nitrogen

I am looking for any safety guidelines for handling cryogenic vessels of nitrogen indoors and outdoors. I am especially interested in recommendations for area monitors to detect leaks, flow detection devices, etc.

Method to move components in a cryogenic environment

Does anyone know of a method with which to reliably move components in a cryogenic environment? We are interested in moving detectors in a cryogenically cooled (2K) vacuum chamber, which is contained within a larger cryostat/isolation vacuum with thermal shields. As the desired horizontal or vertical displacement is between 10...

CATEGORIES