Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

How much heat energy does LN2 contain per lb.?

I would like to know how much heat energy liquid nitrogen contains per lb. In other words, per lb. of liquid, how many BTUs of heat would N2 absorb in the process of coming up to about 60F? I want to capture the cold energy of nitrogen as it vaporizes...

Software for thermophysical properties of helium down to 1K

What are the options when it comes to software for thermophysical properties of helium at temperatures down to 1K? I know Hepak – is it still the most commonly used package?

Refilling process of a helium cryogenic plant

I’m trying to collect some information about the refilling process of a helium cryogenic plant. Due to the physiologic losses I expect to have to foreseen a periodic refilling of helium. Our plant will be characterized by a refrigerator/liquefactor. A control cryostat with 4.5 K LHe coming from the liquefactor...

What's the best gas to use for pulse GMAW?

I have a 78″ ID vessel, 3/8″ thick shells, ½” heads, from SA-240-304L, which will have an ASME U-Stamp and I am planning on sub-arcing the seams and using pulse GMAW (ER308L for both) for the nozzles. I am comfortable with the SAW, but I am wondering about the best...

Manufacturer of liquid pump for use at 170 K

We’re in need of a liquid pump for use at 170 K in our refrigerator to pump Paratherm cryogenic heat transfer fluid. Can anyone suggest a manufacturer? Our flow rate is 16 liters/minute, and a head of 10 m. The specific gravity of the fluid is 0.85 and the viscosity...

Question about configuration of an 80 K helium circuit

I have a question about a possible configuration of an 80 K helium circuit from our cryogenic plant. A helium flow at 80 K and 18 bar is needed at the customer’s inlet. In order to decouple the refrigerator from the customer, I thought to propose the following solution: –...

Latest in Defining Cryogenics

Mixed Refrigerant Cycles

Most cryogenic refrigeration systems, both large scale systems and cryocoolers, use helium as a working fluid. There are a number of advantages to helium, not the least of which is that helium remains a fluid down to the lowest achievable temperatures. In order to freeze helium, pressures of over 20...

Fountain Pumps and He II Phase Separators

Helium II (He II), the second liquid phase of the 4He isotope described in this column in Cold Facts Spring 2010 (http://2csa.us/he2), can be modeled as consisting of two interpenetrating fluids. One, the superfluid component, has zero viscosity and entropy and the other, the normal fluid component, has nonzero viscosity...

Turboexpanders

A vital technology in the refrigerators and liquefiers described in Cold Facts Volume 31 Number 3 is that of turboexpanders. These devices are rotating machines in which the process fluid (e.g., helium) does work against the turboexpander while moving from high pressure to a lower pressure and thus is cooled....

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

An Issue of Pressure and Flow Rate in a Supply Tank

Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...

Using MLI on VJ Line Joints or Cryo Storage Tanks

When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...

Separated layers of ice over a pipe

I want to know that why there are different layers of ice over a pipe carrying a cryogenic fluid, each layer separated with clear marks / lines? What do these layers signify?

Using nitrogen as a cryogen

Is it possible to achieve -200˚C using nitrogen as a cryogen?

CATEGORIES