Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

Cooled coal emissions would clean air, lower health and climate change costs

Refrigerating coal plant emissions would reduce levels of dangerous chemicals that pour into the air—including carbon dioxide— by more than 90 percent, at a cost of 25 percent efficiency, according to a simple math-driven formula designed by a team of University of Oregon physicists.

Israeli refrigerator part of equipment on Mars Curiosity Rover

The Curiosity rover, currently on Mars after recently landing in a tricky operation controlled by National Space and Aeronautics Administration (NASA) technicians, includes a refrigerator manufactured in Israel.

First room-temperature maser developed

British researchers have, for the first time, built a prototype solid-state maser that works at room-temperature, with no permanent applied magnetic field.

Estimating cost for components of a helium plant

I have to perform a cost estimation of our helium cryogenic plant design. I based it on the formula discussed in the following article “THE COST OF HELIUM REFRIGERATORS AND COOLERS FOR SUPERCONDUCTING DEVICES AS A FUNCTION OF COOLING AT 4 K” by M. A. Green: C(M$) = 2.6 [R(kW)]^0.63...

How much heat energy does LN2 contain per lb.?

I would like to know how much heat energy liquid nitrogen contains per lb. In other words, per lb. of liquid, how many BTUs of heat would N2 absorb in the process of coming up to about 60F? I want to capture the cold energy of nitrogen as it vaporizes...

Software for thermophysical properties of helium down to 1K

What are the options when it comes to software for thermophysical properties of helium at temperatures down to 1K? I know Hepak – is it still the most commonly used package?

Latest in Defining Cryogenics

Joule-Thomson Effect

The Joule-Thomson (JT) effect is a thermodynamic process that occurs when a fluid expands from high pressure to low pressure at constant enthalpy (an isenthalpic process). Such a process can be approximated in the real world by expanding a fluid from high pressure to low pressure across a valve. Under...

Current Leads

One of the challenges of using superconducting magnets is the connection of the magnet to a room temperature power supply. This is accomplished via current leads. The trick is that current leads should ideally have a low heat leak, since they connect room temperature to cryogenic temperature, while at the...

Multilayer Insulation

Multilayer insulation (also referred to as superinsulation) is a key component in the reduction of heat leak to cryogenic systems due to thermal radiation. MLI consists of a series of uncooled reflective surfaces placed in the vacuum space between two surfaces, one warmer than the other. Generally speaking, for ideal...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

An Issue of Pressure and Flow Rate in a Supply Tank

Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...

Using MLI on VJ Line Joints or Cryo Storage Tanks

When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...

Separated layers of ice over a pipe

I want to know that why there are different layers of ice over a pipe carrying a cryogenic fluid, each layer separated with clear marks / lines? What do these layers signify?

Using nitrogen as a cryogen

Is it possible to achieve -200˚C using nitrogen as a cryogen?

CATEGORIES