Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

Dippin’ Dots reacts to the marketplace

Would you like your coffee regular, black or pelletized? The question is important to the makers of Dippin’ Dots, those supercold beads of ice cream that are sold largely at ballparks and amusement parks and have become a staple of childhood summers.

CERN/ITER collaboration rescues Japanese magnet project

The iter newsline reports that when the March 2011 earthquake that devastated Japan dramatically disrupted a quality control step in the manufacturing process of the superconducting wires for the ITER magnets, swift action by CERN allowed the verification process to proceed.

US ITER SC magnet contract goes to General Atomics

The US ITER Project Office at Oak Ridge National Laboratory competitively awarded a multi-year contract to General Atomics to produce superconducting magnets for the central solenoid of ITER, an experimental fusion facility that aims to demonstrate the feasibility of fusion energy for the commercial power grid.

US Helium Reserve nearing depletion

Officials at the Federal Helium Reserve, the source of almost half of the US helium supply and more than a third of the world's, say that the reserve could exhaust its supply by 2020.

Hints of Higgs boson detected at Tevatron, LHC

Scientists of the CDF and DZero collaborations at Fermilab continue to increase the sensitivity of their Tevatron experiments to the Higgs particle and narrow the range in which the particle seems to be hiding.

Meyer Tool Certified for European Union PED Welding

This past October, five members of the Meyer Tool & Mfg., Inc. weld department spent an intensive two days welding test coupons while under the observation of Todd Ward of the Hartford Steam Boiler Inspection and Insurance Company (HSBCT).

Latest in Defining Cryogenics

Joule-Thomson Effect

The Joule-Thomson (JT) effect is a thermodynamic process that occurs when a fluid expands from high pressure to low pressure at constant enthalpy (an isenthalpic process). Such a process can be approximated in the real world by expanding a fluid from high pressure to low pressure across a valve. Under...

Current Leads

One of the challenges of using superconducting magnets is the connection of the magnet to a room temperature power supply. This is accomplished via current leads. The trick is that current leads should ideally have a low heat leak, since they connect room temperature to cryogenic temperature, while at the...

Multilayer Insulation

Multilayer insulation (also referred to as superinsulation) is a key component in the reduction of heat leak to cryogenic systems due to thermal radiation. MLI consists of a series of uncooled reflective surfaces placed in the vacuum space between two surfaces, one warmer than the other. Generally speaking, for ideal...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

An Issue of Pressure and Flow Rate in a Supply Tank

Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...

Using MLI on VJ Line Joints or Cryo Storage Tanks

When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...

Separated layers of ice over a pipe

I want to know that why there are different layers of ice over a pipe carrying a cryogenic fluid, each layer separated with clear marks / lines? What do these layers signify?

Using nitrogen as a cryogen

Is it possible to achieve -200˚C using nitrogen as a cryogen?

CATEGORIES