Particle accelerators applications include baby diapers
In symmetry, Elizabeth Clements reports on one of the myriad, yet surprising, applications for particle accelerators: baby diapers!
ADVERTISEMENT
KEK Director General assesses earthquake damage, tells repair plans
Atsuto Suzuki, Director General at KEK, the Japanese high energy accelerator research organization, reported on damage caused by the recent earthquake and recovery prospects in his “DG’s Corner” column: First of all, I would like to express my deepest appreciation for the messages of concern, sympathy and encouragement that we...
Superconductivity pioneer Paul Chu featured in exhibit
Superconductivity Pioneer Paul Chu was featured in an unusual exhibit in Texas. A white lab coat and a pair of worn sneakers are almost standard-issue items for a research facility, but they don't seem to rise to the rank of museum exhibit. Yet, that’s exactly where you can find one...
Paul Chu expected more progress by now
Superconductivity pioneer Dr. Paul Chu expected faster progress since his discoveries, he told Cold Facts Editor Theresa Boehl in a recent brief interview. Cold Facts: Did you have any idea of the potential impact of superconductivity when you were doing your groundbreaking research years ago? Chu: Yes, I think I...
Mathias Kläui Wins Kurti Science Prize
Oxford Instruments NanoScience announced that Professor Mathias Kläui from the SwissFEL, Paul Scherrer Institut and the Laboratory of Nanomagnetism and Spin Dynamics, École Polytechnique Fédérale de Lausanne, is the 2011 recipient of the Nicholas Kurti European Science Prize.
NASA to send up teachers on SOFIA
NASA has selected six teachers to work with scientists aboard the Stratospheric Observatory for Infrared Astronomy (SOFIA) during research flights in May and June. This is the first team of educators selected to participate in SOFIA’s Airborne Astronomy Ambassadors program.
ADVERTISEMENT
Joule-Thomson Effect
The Joule-Thomson (JT) effect is a thermodynamic process that occurs when a fluid expands from high pressure to low pressure at constant enthalpy (an isenthalpic process). Such a process can be approximated in the real world by expanding a fluid from high pressure to low pressure across a valve. Under...
Current Leads
One of the challenges of using superconducting magnets is the connection of the magnet to a room temperature power supply. This is accomplished via current leads. The trick is that current leads should ideally have a low heat leak, since they connect room temperature to cryogenic temperature, while at the...
Multilayer Insulation
Multilayer insulation (also referred to as superinsulation) is a key component in the reduction of heat leak to cryogenic systems due to thermal radiation. MLI consists of a series of uncooled reflective surfaces placed in the vacuum space between two surfaces, one warmer than the other. Generally speaking, for ideal...
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
In need of books to start a cryogenic engineering department
My company is going to create a cryogenic engineering department and we need some books in order to facilitate this project. This is the kind of information we would like to obtain from the books: 1- Calculations for determining the storage facilities, such as storage tanks, pumps, compressors, etc. 2-...
Having some difficulty with the design of a cryogenic pressure vessel
I am a graduate student in the Dept. of Mechanical Engineering at West Virginia University. As a part of my research, I’m doing a case study of design of a Cryogenic Pressure Vessel. I’m facing a little difficulty in the process, and would be very grateful to you if you...
What's the difference between a cryocooler and a cryostat?
What’s the difference between a cryocooler and a cryostat?