Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

Viewing Fast Vortex Motion in a Superconductor

S. Nakamura et al. [1] Peering into the vortex. Top: Vortices form in a superconducting film (gray) in the presence of an external magnetic field provided by a coil. The field generates a shielding current in the film (pink). An infrared pulse transmitted through the superconducting film provides information about the vortices’...

KLM Partners With ZeroAvia For Liquid Hydrogen-Powered Demo Flight

KLM Royal Dutch Airlines has agreed to perform a flight demonstration of ZeroAvia’s ZA2000 hydrogen-electric engines in 2026. “We’re going to do a groundbreaking demonstration flight between two airports using liquid hydrogen fuel,” KLM CityHopper MD Maarten Koopmans says at the Farnborough Airshow. “KLM wants to be a front-runner in this field, and taking...

BHEX Leverages Cryogenics to Capture Black Holes

Introduction to BHEX-The Black Hole Explorer (BHEX) is a mission that will discover and measure a black hole’s photon ring, capturing light that has orbited a black hole. BHEX will extend the Event Horizon Telescope (EHT) into space, producing the sharpest images in the history of astronomy, whilst operating a...

Looking Backward and Forward

Since 2018 I have been writing this column on pioneers in cryogenics. So far, a total of 30 people have been profiled. With this column taking a slightly different direction in the future (more below), it’s worth asking if these pioneers had anything in common. Here are a few common...

Equigas’ Strategic Acquisition is a Catalyst for Innovation

Equigas, Inc., a North Carolina-based gas equipment distributor, has embarked on an exciting new chapter with its recent acquisition of Correct Cryogenics, a respected cryogenic service provider headquartered in the Southwest US. This strategic move is a pivotal moment for Equigas as it seeks to expand its service offerings and...

Fives Pioneers Renewable Energy Storage and Hydrogen Mobility

The Largest Renewable Energy Storage Project-Fives, a global industrial engineering group, has been selected by Zhonglv Zhongke Energy Storage Technology Co. to supply cryogenic equipment for the largest renewable energy storage project on an industrial scale. This project, located in Golmud, Qinghai province, China, is set to be operational by...

Latest in Defining Cryogenics

Dewar

A dewar is a type of cryostat named after Sir James Dewar, the researcher who first developed the concept of a vacuum insulated container with silvered walls to reflect thermal radiation. Dewar was the first to liquefy hydrogen, and he created the device to store his discovery. The thermos bottle...

Stirling and Gifford-McMahon Cryocoolers

Stirling and Gifford-McMahon (GM) cryocoolers are two of the most commonly used cryocoolers in cryogenics. Both devices have a significant industrial base and operate at a wide range of temperatures and capacities. The thermodynamic cycles for both of these cryocoolers are quite similar. The Stirling cycle consists of a compressor,...

Liquefied Natural Gas (LNG)

A significant commercial application of cryogenics is the liquefaction, transport and storage of natural gas. Liquefied Natural Gas (LNG) is generally 95 percent methane with a few percent ethane and much lower concentrations of propane and butane. LNG liquefies at 111.6 K. Unlike many applications of cryogenics, the motivation for...

Latest in Cryo Central

Food Processing

Cryogenics and Food The industrial gas industry provides a host of products and services related to food. The various gases have useful and sometimes fascinating applications in food industry. “The food industry is not a homogenous industry. The needs of customers processing hamburger vs. poultry vs. strawberries vs. seafood, for...

Primary Standards

Elie K. Track Hypres, Inc. elie@hypres.com http://www.hypres.com/ Primary standards involve the exact definition and realization of units of measurement for various quantities, time, length, mass, voltage, resistance, current, etc. International agreements based on the latest scientific knowledge define those units, and their realizations vary depending on the unit itself. For...

Shrink Fitting

Robin A. Rhodes Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Shrink fitting, (or “compression fitting” as it is sometimes called), is a method used to insert a pin or bushing into a housing or other assembly requiring an extremely tight tolerance fit. It can be used as an alternative to...

Telecommunications

From the Winter 2004 issue of Cold Facts magazine The recent M-Calc IV — 4th Industry Assessment workshop discussing military and commercial applications for low-cost cryocoolers, held in November in San Diego, highlighted progress being made in cryogenics as applied in telecommunications. The reliability and long lifetime of projects now...

Latest in Ask the Experts

Need help comparing chest freezers and upright freezers

Currently we use in our Biobank an upright -80 freezer to store all our samples. We are planning to buy a fully automated bio-repository storage that will do the picking of samples under restricted conditions. But in the meantime I foresee that we have to pick the samples manually. The...

Need recommendations for cryogenic vials

I am looking into standardizing our range of bio storage tubes (cryogenic vials). These will be for both blood and tissue samples and their derivatives. Any recommendations, comments on Micronics, Nalgene, Nunc and or others that are suitable for long term -80 C and -196 C storage, DNA/RNA suitable, would...

We need a custom machine for flash freezing of water

We are an ice making company and have started a new project, which is related to flash freezing of water. It is based on cryogenics technology and we need a custom made machine. I would kindly ask you to pass me a few companies who would be interested in such...

Looking for a pump suitable for cold liquids

I would like to construct a small cooling circuit (appr. 50 x 50 cm) pumping liquid at a temperature down to -120°C from a cold reservoir to the specimen to be cooled. The tubes and connections are not a problem, but does somebody know a pump (suction/compression for circulation) suitable...

CATEGORIES