Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

Cryogenic Treatment Database is relaunched under CSA auspices

The Cryogenic Treatment Database (CTD) has been relaunched with a new, sleek look, an improved search function, and is now an official CSA Web site. The CTD was created and debuted online in 2009 to encourage scientific research in the field of cryogenic treatment by providing a public and central...

Niowave supplies two SRF cavities for Project X

Companies in the United States are rapidly learning to build the superconducting radio-frequency cavities Fermilab needs for future accelerators such as the proposed Project X and the International Linear Collider.

Fermilab crews work on beamline vacuum system for New Muon Lab

From Fermilab Today: It is perhaps fitting that the New Muon Lab, a long, low concrete affair facing open fields, sits facing the northern edge of Fermilab’s property.

J. Murray Gibson elected chair of AAAS physics section

Argonne National Laboratory Associate Laboratory Director J. Murray Gibson has been elected chair of the Physics Section of the American Association for the Advancement of Science (AAAS).

Indian-made RF cavity passes test at Fermilab

A superconducting radio-frequency cavity made in India has passed its first test at Fermilab.

Chart to relocate CAIRE to Canton GA

Chart Industries announced that it will close CAIRE's liquid oxygen therapy manufacturing operations in Plainfield IN and relocate the manufacturing and customer service operations to a facility in Canton GA.

Latest in Defining Cryogenics

Stability

Stability refers to the ability of a device employing superconductors to remain in its superconducting state after part of the superconductor transitions back to its normal conducting state due to a disturbance. While the concept can apply to many superconducting devices—transmission lines, generators, motors, etc.—it is most commonly considered in...

Cable-in-Conduit Conductors

Cable-in-Conduit Conductors (CICC) are a common form of superconducting cable used in large-scale applications. There are several varieties of CICCs, but they all consist of many small, stabilized superconducting wires contained within a conduit through which a coolant (typically supercritical He II) flows. Figure 1 shows the cross section of...

Bayonet Coupling

A bayonet coupling is a demountable joint that allows for quick and easy connection and disconnection of cryogenic components, including transfer lines, cryostats, liquefiers and refrigerators. Bayonets provide a number of advantages, chief among them the ability to connect and disconnect the bayonets while components they connect are still at...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

In need of books to start a cryogenic engineering department

My company is going to create a cryogenic engineering department and we need some books in order to facilitate this project. This is the kind of information we would like to obtain from the books: 1- Calculations for determining the storage facilities, such as storage tanks, pumps, compressors, etc. 2-...

What does "n" stand for?

We have a picture where the various layers of a transfer line are labeled.

Having some difficulty with the design of a cryogenic pressure vessel

I am a graduate student in the Dept. of Mechanical Engineering at West Virginia University. As a part of my research, I’m doing a case study of design of a Cryogenic Pressure Vessel. I’m facing a little difficulty in the process, and would be very grateful to you if you...

What's the difference between a cryocooler and a cryostat?

What’s the difference between a cryocooler and a cryostat?

CATEGORIES