New series of high current connectors from Solid Sealing Technology
Solid Sealing Technology has introduced two new series of high current connector solutions, which are rated for currents from 69 to 250 amps.
ADVERTISEMENT
GOW-MAC introduces Series AR710 and AR720 gas analyzers
GOW-MAC Instrument Company, introduces the process oriented Series AR710 and AR720 gas analyzers with High Frequency Argon Discharge Ionization Detector (HFADD).
Ken Halpin joins FIBA
FIBA Technologies, Inc. recently announced the addition of Ken Halpin as Senior Director, Human Resources.
Ray Radebaugh receives the 2009 Collins Award
At the CEC/ICMC Awards Breakfast on July 2, Ray Radebaugh received the prestigious Samuel C. Collins Award for “an individual who has made outstanding contributions to the identification and solution of cryogenic engineering problems and has…demonstrated a concern for the cryogenic community through unselfish professional service and leadership to this...
CryoStim™ treatment to begin FDA clinical trials
Immunovative Therapies, Ltd. recently announced that its New Drug (IND) application was cleared by the US Food and Drug Administration, allowing the company to begin clinical trials of its experimental CryoStim™ cancer vaccine product for the treatment of advanced metastatic solid tumors.
2009 CEC/ICMC overview
The 2009 Cryogenic Engineering Conference/International Cryogenic Materials Conference brought together almost 500 persons from all areas of cryogenics to exchange technology and ideas.
ADVERTISEMENT
Dewar
A dewar is a type of cryostat named after Sir James Dewar, the researcher who first developed the concept of a vacuum insulated container with silvered walls to reflect thermal radiation. Dewar was the first to liquefy hydrogen, and he created the device to store his discovery. The thermos bottle...
Stirling and Gifford-McMahon Cryocoolers
Stirling and Gifford-McMahon (GM) cryocoolers are two of the most commonly used cryocoolers in cryogenics. Both devices have a significant industrial base and operate at a wide range of temperatures and capacities. The thermodynamic cycles for both of these cryocoolers are quite similar. The Stirling cycle consists of a compressor,...
Liquefied Natural Gas (LNG)
A significant commercial application of cryogenics is the liquefaction, transport and storage of natural gas. Liquefied Natural Gas (LNG) is generally 95 percent methane with a few percent ethane and much lower concentrations of propane and butane. LNG liquefies at 111.6 K. Unlike many applications of cryogenics, the motivation for...
Primary Standards
Elie K. Track Hypres, Inc. elie@hypres.com http://www.hypres.com/ Primary standards involve the exact definition and realization of units of measurement for various quantities, time, length, mass, voltage, resistance, current, etc. International agreements based on the latest scientific knowledge define those units, and their realizations vary depending on the unit itself. For...
Shrink Fitting
Robin A. Rhodes Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Shrink fitting, (or “compression fitting” as it is sometimes called), is a method used to insert a pin or bushing into a housing or other assembly requiring an extremely tight tolerance fit. It can be used as an alternative to...
Telecommunications
From the Winter 2004 issue of Cold Facts magazine The recent M-Calc IV — 4th Industry Assessment workshop discussing military and commercial applications for low-cost cryocoolers, held in November in San Diego, highlighted progress being made in cryogenics as applied in telecommunications. The reliability and long lifetime of projects now...
Wind Tunnels
Dr. Robert Kilgore The development of the cryogenic wind tunnel is one of many significant breakthroughs in both cryogenics and wind-tunnel technology made during the past millennium. Interest in the development of high-speed commercial and military aircraft resulted in a review of problems of flow simulation in transonic wind tunnels...
An Issue of Pressure and Flow Rate in a Supply Tank
Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...
Using MLI on VJ Line Joints or Cryo Storage Tanks
When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...
Separated layers of ice over a pipe
I want to know that why there are different layers of ice over a pipe carrying a cryogenic fluid, each layer separated with clear marks / lines? What do these layers signify?