Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

Aerojet awarded contract from NASA Glenn Research Center

GenCorp Inc. company Aerojet has been awarded a contract from NASA Glenn Research Center for the development of a 5,500lbf Liquid Oxygen-Liquid Methane engine. Liquid-Oxygen Liquid-Methane propulsion systems have been identified as a promising option for future space vehicles.

NASA extends Pratt & Whitney Rocketdyne’s contract

NASA awarded a contract extension to Pratt & Whitney Rocketdyne, a United Technologies Corp. company. The extension will allow the company to continue development of the Common Extensible Cryogenic Engine (CECE), in an effort to support future lunar landing development.

Aqua Cure Ltd. awarded contract by US Air Force

Aqua Cure Ltd., Buffalo NY, has been awarded a $131,430 contract by the US Air Force for cryogenic vaporizers.

Hydrogen rocket technologies prepare for lift-off

An engine which is fueled by a mix of liquid oxygen and hydrogen has been developed to demonstrate advanced rocket technologies for future space vehicles, such as lunar vehicles, and has achieved a technical milestone in throttling capability.

Drell appointed acting director at SLAC

Persis Drell has been appointed acting director at the Stanford Linear Accelerator Center (SLAC); she was formerly deputy director. She succeeds Jonathan Dorfan who becomes assistant to the president, focusing on the relationship between Stanford University and SLAC.

Norman R. Augustine speaks at AAAS meeting

During the AAAS meeting held on February 18, 2008, Norman R. Augustine shared some challenging and interesting insight into the alarming state of science and technology research and education in the United States.

Latest in Defining Cryogenics

Cold Compressors

A common way to provide cooling below the normal boiling point of helium (4.2K) is to reduce the pressure above the bath of liquid helium, thus also reducing the bath’s equilibrium saturation temperature. For example, to produce a 1.8K bath of liquid helium, the saturation pressure has to be reduced...

Kapitza Conductance

Kapitza conductance refers to the heat transfer between a solid surface and a fluid that covers that surface. Fundamentally, it describes the inherent difficulty in transferring energy from a solid to the fluid covering the solid surface. This phenomenon was first observed by P. L. Kapitza in 1941 while studying...

Thermosyphons

A thermosyphon (or thermosiphon) is a device that transfers heat via natural convection in a fluid. The natural convection is driven by gravity with the colder, denser fluid flowing downhill and the warmer, less dense fluid flowing back up. Thus, thermosyphons connect an object to be cooled with a reservoir...

Latest in Cryo Central

Magnets

From “Superconductivity: Present and Future Applications” by the Coalition for the Commercial Application of Superconductors. Particle physics uses accelerators to recreate the conditions of the early universe in an attempt to piece together the complex puzzle of how we got to where we are today. These huge machines are used...

Energy Storage

From “Superconductivity: Present and Future Applications” by the Coalition for the Commercial Application of Superconductors. With power lines increasingly congested and prone to instability, strategic injection of brief bursts of real power can play a crucial role in maintaining grid reliability. Small-scale Superconducting Magnetic Energy Storage (SMES) systems, based on...

Astronomy

ASTRONOMY IN SPACE by Peter V. Mason, retired, Jet Propulsion Laboratory, and Visiting Associate, California Institute of Technology. Pmason@alumni.caltech.edu In thinking about the reasons to perform astronomy in space, we first consider the effect of the earth’s atmosphere. On a scale of decreasing energy, gamma rays, cosmic rays, X-rays and...

Cryocoolers

What is a Cryocooler? A mechanism that can extract heat from an object (cooler) and by doing so draw its temperature down below approximately 150 Kelvin (cryo). — (Courtesy Dr. Willy Gully) What is the difference between a Cryocooler and a Cryostat? A cryostat is any device designed to maintain...

Latest in Ask the Experts

An Issue of Pressure and Flow Rate in a Supply Tank

Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...

Using MLI on VJ Line Joints or Cryo Storage Tanks

When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...

Separated layers of ice over a pipe

I want to know that why there are different layers of ice over a pipe carrying a cryogenic fluid, each layer separated with clear marks / lines? What do these layers signify?

Using nitrogen as a cryogen

Is it possible to achieve -200˚C using nitrogen as a cryogen?

CATEGORIES