John Bardeen (1908-1991) honored on US Postage Stamp
The US Postal Service has announced that theoretical physicist John Bardeen (1908-1991) is among four scientists chosen to be honored when new American Scientist stamps are issued in April.
ADVERTISEMENT
Dr. Alex P. Malozemoff named an IEEE Fellow
Dr. Alex P. Malozemoff, Executive Vice President and Chief Technology Officer at American Superconductor Corporation recently became an IEEE Fellow for leadership in the development of vortex dynamics of high temperature superconductors.
Chart Ferox promotes Hans Lonsain
Chart has promoted Hans Lonsain to Chairman and Managing Director of Chart Ferox, Chart's European Distribution and Storage business. Lonsain was previously responsible for sales and marketing for Chart Ferox in Europe, the Middle East and Africa.
Spagnoletti appointed VP-North American Sales at Chart
Amato Spagnoletti has been appointed Vice President-North American Sales at Chart Industries, Inc., a CSA Corporate Sustaining Member. Spagnoletti joined Chart in 1998 and was most recently the Director of Sales, Engineered Systems.
Eden hires Allan G. Hanson as Senior Engineer
CSA Corporate Sustaining Member Eden Cryogenics, LLC recently hired Allan G. Hanson as Senior Engineer.
Edward Haberern hired as Key Account Manager at ACME
Edward Haberern has been hired as Key Account Manager at ACME Cryogenics, Inc.
ADVERTISEMENT
Refrigerators and Liquefiers
Two of the most common terms used in cryogenics are “refrigerator” and “liquefier.” These terms describe similar and, as will be seen, in some cases identical components. A refrigerator provides cooling (that is, absorbs heat) at cryogenic temperatures. Refrigerators typically put a working fluid (such as helium) through one of...
Air Separation
Air separation is one of the largest, as well as earliest, industrial applications of cryogenics. In this process, cryogenic temperatures are used to separate air into its constituent gases: nitrogen (78.08%), oxygen (20.95%), argon (0.93%) and carbon dioxide (0.3%). Trace gases such as krypton, neon, xenon and helium total far...
Coefficient of Performance and Figure of Merit
The coefficient of performance (COP) is used to describe the effectiveness of refrigerators, including those operating at cryogenic temperatures. The COP is defined as the amount of heat removed at the cryogenic operating temperature of the refrigerator divided by the amount of work that must be applied to remove the...
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Reliability and mounting of electronic substrates at low temperatures
I am currently working on the design of a focal plane assembly to be implemented on a small satellite (4 EMCCD detectors) to be operated at -80°C (which is not really cryogenic and likely still considered boiling hot for most of you :-). As it is passively cooled, the assembly...
Are 3D drawings included in the sale of a cryogenic plant?
I have a question concerning the 3D drawings of a cryogenic plant. The integration of the 3D drawings of a plant with the 3D main model of a new laboratory or a new facility can be a complex work that takes a lot of time. I would like to know...
Looking for a source of LOX impact testing to ASTM D2512
I have been looking for a source of LOX impact testing to ASTM D2512. I am aware of NASA and White Sands, but am looking for a commercial entity doing the work. No luck so far, even calling a lot of the folks on the CSA website. Any referrals will...