Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

CERN marks latest milestone with ceremony

A brief ceremony in Geneva on November 7, 2007 marked the latest milestone for CERN's Large Hadron Collider (LHC), the world's most powerful particle accelerator.

Two scientists join Argonne’s Center for Nanoscale Materials

Two scientists, Elena Rozhkova and Elena Shevchenko, have joined Argonne National Laboratory's Center for Nanoscale Materials.

AmSC and TECO-Westinghouse announce research joint venture

American Superconductor Corporation and TECO-Westinghouse Motor Company announced the formation of a research joint venture to develop high temperature superconductor (HTS) and related technologies for high-power, direct drive wind generators for offshore wind farms.

DNV approves FIBA for Manufacturer Certificate No. T-1142

Det Norske Veritas (DNV) has granted FIBA Technologies, Inc. approval of Manufacturer Certificate No. T-1142, which approves FIBA for the manufacturing of seamless gas bottles and pressure vessels of Class I and II. FIBA is one of only four companies in the world to be granted this approval.

Carl T. Johnson nominated for Administrator of PHMSA

Carl T. Johnson, former president of The Compressed Gas Association, has been nominated by President George W. Bush to be Administrator of the Pipeline and Hazardous Materials Safety Administration at the Department of Transportation.

James Fesmire gets promoted at NASA Kennedy

CSA Technical Director James Fesmire was recently promoted to the position of Senior Principal Investigator at the NASA Kennedy Cryogenics Test Laboratory.

Latest in Defining Cryogenics

Refrigerators and Liquefiers

Two of the most common terms used in cryogenics are “refrigerator” and “liquefier.” These terms describe similar and, as will be seen, in some cases identical components. A refrigerator provides cooling (that is, absorbs heat) at cryogenic temperatures. Refrigerators typically put a working fluid (such as helium) through one of...

Air Separation

Air separation is one of the largest, as well as earliest, industrial applications of cryogenics. In this process, cryogenic temperatures are used to separate air into its constituent gases: nitrogen (78.08%), oxygen (20.95%), argon (0.93%) and carbon dioxide (0.3%). Trace gases such as krypton, neon, xenon and helium total far...

Coefficient of Performance and Figure of Merit

The coefficient of performance (COP) is used to describe the effectiveness of refrigerators, including those operating at cryogenic temperatures. The COP is defined as the amount of heat removed at the cryogenic operating temperature of the refrigerator divided by the amount of work that must be applied to remove the...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

What is the temperature range of cryogenics?

Could you please tell me what is the temperature range of cryogenics? In other words, is -100°F considered cryogenic, or does it start lower? Could I expect to see some extended life in D2 stamping dies? What would the recipe be to achieve the desired results using cryogenics?