UK pulls out of ILC
A funding crisis at a leading research council in the UK, The Science and Technology Facilities Council (STFC), has forced the country to pull out of plans for the International Linear Collider (ILC).
ADVERTISEMENT
JLab achieves milestone in construction of $310-Million upgrade
A proposed $310-million project that will double the energy of the electron beam at the Thomas Jefferson National Accelerator Facility (Jefferson Lab) achieved a critical milestone on November 9, 2007, when the Department of Energy approved the project's performance baseline.
LCFOA elects Grimm and Urbin to Board
The Linear Collider Forum of America (LCFOA) has elected Dr. Terry Grimm of Niowave and John Urbin of Linde BOC Process Plants to their Board of Directors. Urbin is a CSA board member and Grimm, a CSA member, received the prestigious Boom award from the Society.
“Absolute Zero and the Conquest of Cold” miniseries gets rave reviews
The miniseries Absolute Zero and the Conquest of Cold aired in late July on British BBC4 to rave reviews.
CSA member John Moeller publishes book
CSA member John Moeller, a cryogenic engineering consultant and owner, Trinity Technology, has published his personal account of the early days of the US space program, "From Malabar to the Moon," a hardcover book.
Phillip L. Korodi has joined Eden Cryogenics as Senior Designer
Phillip L. Korodi has joined Eden Cryogenics as Senior Designer. He has had an extensive career in the cryogenic industry. At Eden he will be responsible for vacuum insulated piping design and development over a variety of applications, including turnkey cryogenic systems.
ADVERTISEMENT
Mixed Refrigerant Cycles
Most cryogenic refrigeration systems, both large scale systems and cryocoolers, use helium as a working fluid. There are a number of advantages to helium, not the least of which is that helium remains a fluid down to the lowest achievable temperatures. In order to freeze helium, pressures of over 20...
Fountain Pumps and He II Phase Separators
Helium II (He II), the second liquid phase of the 4He isotope described in this column in Cold Facts Spring 2010 (http://2csa.us/he2), can be modeled as consisting of two interpenetrating fluids. One, the superfluid component, has zero viscosity and entropy and the other, the normal fluid component, has nonzero viscosity...
Turboexpanders
A vital technology in the refrigerators and liquefiers described in Cold Facts Volume 31 Number 3 is that of turboexpanders. These devices are rotating machines in which the process fluid (e.g., helium) does work against the turboexpander while moving from high pressure to a lower pressure and thus is cooled....
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Eliminate negative effects of grinder burn on gear teeth?
Can you tell me if it is possible to eliminate the negative affects of grinder burn on gear teeth with the use of cryogenics?
Information about a process called “cryogenically stretch-formed ss”
I am remembering in the 1970’s when astronauts were walking on the moon and carried oxygen in 300 ss bottles inside LN2 tanks which were filled and pressurized.
Small cryo-gun for our health service clinic
I am Assistant Director for Environmental Health & Safety at a university health service clinic.
Additional sealing materials besides PTFE or glass filled PTFE
I am an engineer looking to improve our solenoid valve sealing on cryogenic medias. I was wondering if you knew of materials other then PTFE or glass filled PTFE that could be used for sealing.