UK pulls out of ILC
A funding crisis at a leading research council in the UK, The Science and Technology Facilities Council (STFC), has forced the country to pull out of plans for the International Linear Collider (ILC).
ADVERTISEMENT
JLab achieves milestone in construction of $310-Million upgrade
A proposed $310-million project that will double the energy of the electron beam at the Thomas Jefferson National Accelerator Facility (Jefferson Lab) achieved a critical milestone on November 9, 2007, when the Department of Energy approved the project's performance baseline.
LCFOA elects Grimm and Urbin to Board
The Linear Collider Forum of America (LCFOA) has elected Dr. Terry Grimm of Niowave and John Urbin of Linde BOC Process Plants to their Board of Directors. Urbin is a CSA board member and Grimm, a CSA member, received the prestigious Boom award from the Society.
“Absolute Zero and the Conquest of Cold” miniseries gets rave reviews
The miniseries Absolute Zero and the Conquest of Cold aired in late July on British BBC4 to rave reviews.
CSA member John Moeller publishes book
CSA member John Moeller, a cryogenic engineering consultant and owner, Trinity Technology, has published his personal account of the early days of the US space program, "From Malabar to the Moon," a hardcover book.
Phillip L. Korodi has joined Eden Cryogenics as Senior Designer
Phillip L. Korodi has joined Eden Cryogenics as Senior Designer. He has had an extensive career in the cryogenic industry. At Eden he will be responsible for vacuum insulated piping design and development over a variety of applications, including turnkey cryogenic systems.
ADVERTISEMENT
Joule-Thomson Effect
The Joule-Thomson (JT) effect is a thermodynamic process that occurs when a fluid expands from high pressure to low pressure at constant enthalpy (an isenthalpic process). Such a process can be approximated in the real world by expanding a fluid from high pressure to low pressure across a valve. Under...
Current Leads
One of the challenges of using superconducting magnets is the connection of the magnet to a room temperature power supply. This is accomplished via current leads. The trick is that current leads should ideally have a low heat leak, since they connect room temperature to cryogenic temperature, while at the...
Multilayer Insulation
Multilayer insulation (also referred to as superinsulation) is a key component in the reduction of heat leak to cryogenic systems due to thermal radiation. MLI consists of a series of uncooled reflective surfaces placed in the vacuum space between two surfaces, one warmer than the other. Generally speaking, for ideal...
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Reliability and mounting of electronic substrates at low temperatures
I am currently working on the design of a focal plane assembly to be implemented on a small satellite (4 EMCCD detectors) to be operated at -80°C (which is not really cryogenic and likely still considered boiling hot for most of you :-). As it is passively cooled, the assembly...
Are 3D drawings included in the sale of a cryogenic plant?
I have a question concerning the 3D drawings of a cryogenic plant. The integration of the 3D drawings of a plant with the 3D main model of a new laboratory or a new facility can be a complex work that takes a lot of time. I would like to know...
Looking for a source of LOX impact testing to ASTM D2512
I have been looking for a source of LOX impact testing to ASTM D2512. I am aware of NASA and White Sands, but am looking for a commercial entity doing the work. No luck so far, even calling a lot of the folks on the CSA website. Any referrals will...