Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

Researchers produce 52.3MV/m gradient field with niobium SC accelerator cavity

Researchers at Japan's KEK High Energy Accelerator Research Organization have successfully produced a 52.3MV/m gradient field with a niobium superconducting accelerator cavity, reportedly reaching the theoretical accelerating gradient limit for current state of the art cavity shapes.

Founder of Meyer Tool & Mfg. dies February 6

Frank Meyer, founder of Meyer Tool & Mfg., longtime CSA supporter and valued member of the cryogenic community, passed away on February 6.

CSA to help promote “Absolute Zero” TV special

CSA has signed on as part of a national partnership program, to help engage the American audience in a story that touches their lives in innumerable ways, a two-part PBS television special based on the Tom Shachtman book, "Absolute Zero and the Conquest of Cold."

First 600m of LHC cryogenic distribution line passes initial tests

The first 600m of the cryogenic distribution line to supply superfluid helium to the superconducting magnets at the Large Hadron Collider at CERN have passed initial testing at room and cryogenic temperatures.

BOC Gases plant commemorates 40th anniversary

BOC Gases commemorated the 40th anniversary of its Otis KS helium plant, one of the world's largest, which refines and produces more helium in one month than it did in its first year of operation.

NHMFL at FSU commissions world-record 900 MHz magnet

CSA corporate sustaining member The National High Magnetic Field Laboratory at Florida State University marked a major scientific leap forward with the commissioning of the world-record 900 MHz magnet in July.

Latest in Defining Cryogenics

Two-Phase Flows

Two-phase flows are those flows in which there is a mixture of two physical states (solid, liquid or vapor). In cryogenic applications, such flows are almost always a mixture of a cryogenic liquid along with its corresponding vapor. A mixture of liquid helium and helium vapor would be a typical...

Supercritical Fluids

A supercritical fluid is defined as a substance whose temperature and pressure exceed those of its critical point. Every pure substance has a critical point that is defined in thermodynamic space by a critical temperature and a corresponding critical pressure. For example, the critical point for helium has a critical...

Brayton Cycle

The Brayton cycle is one of the many thermodynamic cycles used to generate cooling at cryogenic temperatures. Strictly speaking, when referring to cooling we should call this the reverse Brayton cycle as the original Brayton cycle describes the process of power generation or propulsion via a gas turbine. In many...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

Low temperature applications of titanium and alloys

For a technical presentation I would like to have some recommendations for low temperature applications of titanium and titanium alloys. Do you think you can help me?

Designing a liquid oxygen bath

I’m designing a Liquid Oxygen Bath to place composite coupons in the bath and soak 96 samples for intervals of 8 hours, 24 hours, 7 days, 21 days, 42 days, 62 days and 90 days.

School science projects involving cryogenics and metallurgy?

Can you recommend any school science projects that would involve cryogenics and metallurgy?

Metallic Salts Normally Used to Produce Ultra-Low Temperatures?

Regarding the method known as the Adiabatic Demagnetization of Paramagnetic Salts: What metallic salts are normally used to produce the ultra-low temperatures used for near-absolute-zero cryogenic research? Which salts are the most efficient? Which make the best cooling agents? And which are used most commonly by physicists? I am looking...

CATEGORIES