Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

Cryogenic CMOS Design for Quantum Chips on 22FDX

Semiwise in Glasgow has developed transistor SPICE models for cryogenic CMOS chip design and verification using the GlobalFoundries (GF) 22FDX 22nm fully depleted silicon-on-insulator (FD-SOI) process technology. The technology can be used for chips for quantum computers and also for data center processors with liquid nitrogen cooling. Semiwise used its patented...

Cryogenics, Cancer & COVID-19: Transitioning from liquid to air phase cryogenic storage

In this exclusive SelectScience® interview, we speak with a panel of scientific experts to find out how cryogenic storage is helping to advance their novel research projects and break scientific boundaries. Our panel of experts include Dr. Ronan Chaligné, Director of the Single Cell Analysis Innovation Lab at Sloan Kettering Institute,...

Special Permit Sought for Cryogenic Ethane Transport Via Rail

Gas Innovations LNG Refrigerants Inc. is seeking authorization to transport cryogenic ethane via rail in DOT-113C120W9 and DOT-113C120W tank cars, according to the Pipeline and Hazardous Materials Safety Administration (PHMSA). PHMSA, in consultation with the Federal Railroad Administration (FRA), is handling review of the special permit application and requesting comments...

CryoEdge Solves an Ancient Problem with a Cutting-Edge Solution

Ever since the Stone Age, people have searched for the most effective ways to cut and shape materials for best use. This quest has most recently resulted in revolutionary breakthroughs and developments like lasers, plasma beams, and water jets as cutting instruments. Despite these advances, the overwhelming majority of cutting...

How to Avoid a Tank Collapse

The industrial gas industry produces the elemental components of “air” (nitrogen, oxygen, and argon) that are used in other industries as part of their processes. Once separated from air, each element exists as an extremely cold cryogenic temperature liquid. Typical liquid temperatures are −185° C. Large, field-erected tanks are used...

Hydrogen Liquefaction System Developed from Stirling Cryogenerators

Stirling cryogenerators have been widely used since the 1960s and 1970s for the production of LH2 at various institutes and research laboratories all over the world. In materials sciences, small-scale production was used to study the properties and behavior of LH2 and its effect on materials. In scientific devices, Stirling...

Latest in Defining Cryogenics

Dewar

A dewar is a type of cryostat named after Sir James Dewar, the researcher who first developed the concept of a vacuum insulated container with silvered walls to reflect thermal radiation. Dewar was the first to liquefy hydrogen, and he created the device to store his discovery. The thermos bottle...

Stirling and Gifford-McMahon Cryocoolers

Stirling and Gifford-McMahon (GM) cryocoolers are two of the most commonly used cryocoolers in cryogenics. Both devices have a significant industrial base and operate at a wide range of temperatures and capacities. The thermodynamic cycles for both of these cryocoolers are quite similar. The Stirling cycle consists of a compressor,...

Liquefied Natural Gas (LNG)

A significant commercial application of cryogenics is the liquefaction, transport and storage of natural gas. Liquefied Natural Gas (LNG) is generally 95 percent methane with a few percent ethane and much lower concentrations of propane and butane. LNG liquefies at 111.6 K. Unlike many applications of cryogenics, the motivation for...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

Presence of alloying elements in tool steels

I want to expand my knowledge of cryogenics in general and tool steels in particular. Specifically, I am keenly interested in learning about the presence of alloying elements in tool steels and how their presence in various combinations affects the performance of tool steels after cryogenic treatment.

Pros and cons of barcoding samples

I was wondering if I could ask for input on pros and cons of barcoding. We are in the process of trying to decide if we should start barcoding our samples and I’m just not sure if this is feasible for our organization. We have numerous sites all over the...

Purity level of helium gas stream in cryo plant purification system

I would like to know what the principal methods and the relative instrumentation to check the purity level of helium gas stream in the purification system of a common helium cryogenic plant are. What principles are these instruments based on? And what are their principal characteristics?

LN2 for cryopreservation through controlled rate freezing of samples

I am the cryogenic specialist for a stem cell bank in Greece. I am trying to find the minimum requirements (purity, humidity, etc.) of liquid nitrogen for cryopreservation through controlled rate freezing of biological samples.

CATEGORIES