ADVERTISEMENT

Sealing Options for Aluminum Vacuum Chambers

The goal of any sealing option for a vacuum chamber, whether aluminum or another material, is to provide a leak free (or acceptable leak rate) transition from the interior vacuum of the chamber to the exterior environment. For all types of vacuum chambers these options fall into two broad categories:...

Cool Fuel: Bias and Green versus Blue Hydrogen

I was ready to write about the awesome green beauty of a 454.6 nm argon laser and what it does to the hydrogen molecule when a friend sent me an article from the New York Times by Hiroko Tabuchi, “For many hydrogen is the fuel of the future. New research...

In Memoriam: Peter Mason 1928-2021

We regret to report the passing of former Jet Propulsion Laboratory (JPL) leader, visiting associate at Caltech, CSA Fellow and Cold Facts Space Cryogenics columnist, Peter V. Mason. He passed after a short illness on May 30, 2021.

Qubit Measurement Systems Right Out of the Box?

During past years, advances in both lithography and millikelvin cryogenics have supported and enabled vast improvement in the sophistication of experimental research on electrical circuits that display uniquely quantum mechanical behavior. It comes as no surprise that dilution refrigerator measurement systems have moved beyond basic physics research contraptions and into...

International Cryogenic Research, Industry Leaders Meet for Virtual CEC-ICMC ’21

While the pandemic may have changed the approach, organizers and attendees of the 2021 Cryogenic Engineering Conference–International Cryogenic Materials Conference participated in a valuable week of presentations, discussions, posters, short courses and exhibitions. Held virtually via Whova® from July 17–23, CEC-ICMC hosted over 670 attendees from across the globe in...

ADVERTISEMENT

Joule-Thomson Effect

The Joule-Thomson (JT) effect is a thermodynamic process that occurs when a fluid expands from high pressure to low pressure at constant enthalpy (an isenthalpic process). Such a process can be approximated in the real world by expanding a fluid from high pressure to low pressure across a valve. Under...

Current Leads

One of the challenges of using superconducting magnets is the connection of the magnet to a room temperature power supply. This is accomplished via current leads. The trick is that current leads should ideally have a low heat leak, since they connect room temperature to cryogenic temperature, while at the...

Multilayer Insulation

Multilayer insulation (also referred to as superinsulation) is a key component in the reduction of heat leak to cryogenic systems due to thermal radiation. MLI consists of a series of uncooled reflective surfaces placed in the vacuum space between two surfaces, one warmer than the other. Generally speaking, for ideal...

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Data on thermal expansion down to 40K

For our cold mechanics, we use ball bearings from ADR from stainless steel which is AISI 440C, DIN X105CrMo17, W.Nr. 1.4125. Does anyone know the data of thermal expansion of this material down to 40 K?

Materials for "cryogenics in spacetech"?

I had to take a seminar in a national competition that is to be held in our country on the topic “cryogenics in spacetech.” For this, I need some materials related to it, and I thought to approach you for help. Can you suggest some relevant materials?