ADVERTISEMENT

Transformative ‘Green’ Accelerator Achieves World’s First 8-pass Full Energy Recovery

Scientists from Cornell University and the US Department of Energy’s (DOE) Brookhaven National Laboratory (BNL) have successfully demonstrated the world’s first capture and reuse of energy in a multi turn particle accelerator, where electrons are accelerated and decelerated in multiple stages and transported at different energies through a single beamline....

The Future of Particle Accelerators May Be Autonomous

Operators at the Linac Coherent Light Source (LCLS) particle accelerator, part of SLAC National Laboratory at Stanford University in California, looked into how they were spending their time managing the machine. They tracked the hours they spent on tasks like investigating problems and orchestrating new configurations of the particle beam...

60 Years of DESY: From Hamburg Particle Accelerator to Global Research Center

For the past 60 years, fundamental research has been carried out at the Deutsches Elektronen-Synchrotron (DESY) in Hamburg-Bahrenfeld. In those 60 years, DESY has become a world leader in accelerator technology, structure research, particle physics and astroparticle physics. DESY has developed pioneering technologies, which have been used by scientists from...

Jefferson Lab to be Major Partner in Brookhaven Electron Ion Collider Project

The Department of Energy (DOE) announced that it has taken the next step toward the construction of an Electron Ion Collider (EIC) in the United States. DOE announced that the collider will be sited at DOE’s Brookhaven National Laboratory in Upton NY. In addition, DOE’s Thomas Jefferson National Accelerator Facility...

The Pocket-Sized Particle Accelerator

The accelerator-on-a-chip is just a prototype, but its design and fabrication techniques can be scaled up to deliver particle beams accelerated enough to perform cutting-edge experiments that don’t require the power of a massive accelerator. By placing these chips in a series, researchers from SLAC National Laboratory and Stanford University...

ADVERTISEMENT

Stability

Stability refers to the ability of a device employing superconductors to remain in its superconducting state after part of the superconductor transitions back to its normal conducting state due to a disturbance. While the concept can apply to many superconducting devices—transmission lines, generators, motors, etc.—it is most commonly considered in...

Cable-in-Conduit Conductors

Cable-in-Conduit Conductors (CICC) are a common form of superconducting cable used in large-scale applications. There are several varieties of CICCs, but they all consist of many small, stabilized superconducting wires contained within a conduit through which a coolant (typically supercritical He II) flows. Figure 1 shows the cross section of...

Bayonet Coupling

A bayonet coupling is a demountable joint that allows for quick and easy connection and disconnection of cryogenic components, including transfer lines, cryostats, liquefiers and refrigerators. Bayonets provide a number of advantages, chief among them the ability to connect and disconnect the bayonets while components they connect are still at...

Food Processing

Cryogenics and Food The industrial gas industry provides a host of products and services related to food. The various gases have useful and sometimes fascinating applications in food industry. “The food industry is not a homogenous industry. The needs of customers processing hamburger vs. poultry vs. strawberries vs. seafood, for...

Primary Standards

Elie K. Track Hypres, Inc. elie@hypres.com http://www.hypres.com/ Primary standards involve the exact definition and realization of units of measurement for various quantities, time, length, mass, voltage, resistance, current, etc. International agreements based on the latest scientific knowledge define those units, and their realizations vary depending on the unit itself. For...

Shrink Fitting

Robin A. Rhodes Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Shrink fitting, (or “compression fitting” as it is sometimes called), is a method used to insert a pin or bushing into a housing or other assembly requiring an extremely tight tolerance fit. It can be used as an alternative to...

Telecommunications

From the Winter 2004 issue of Cold Facts magazine The recent M-Calc IV — 4th Industry Assessment workshop discussing military and commercial applications for low-cost cryocoolers, held in November in San Diego, highlighted progress being made in cryogenics as applied in telecommunications. The reliability and long lifetime of projects now...

An Issue of Pressure and Flow Rate in a Supply Tank

Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...

Using MLI on VJ Line Joints or Cryo Storage Tanks

When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...