ADVERTISEMENT

New Payload Fairing from RUAG Space Enables Quieter Journey to Space

RUAG Space (CSA CSM) has successfully developed and tested a new, low shock jettison system funded by the Future Launchers Preparatory Program (FLPP) of the European Space Agency (ESA). The program develops technologies for future European launch vehicles and upgrades of existing launch vehicles. This system enables a quieter and...

LN2 Freezing of Live Bacteria in Dairy Products Boosts Productivity, Lowers Costs

GEA, an Australian electrical component company, has now launched a nitrogen freezing pilot plant for bacteria which takes a novel approach: freezing the bacteria in droplets using a liquid nitrogen bath outside the freeze dryer, then drying the pellets via the normal procedure. By freezing bacteria into pellets before drying,...

Thales Cryogenics, Eindhoven Receives NASA Awards

NASA has awarded the cryogenics department at Thales, Eindhoven two recognitions at its 2019 Honors ceremony held at the Jet Propulsion Laboratory in Pasadena the week of November 11. Both were awarded for Thales’ contribution to the success of the ongoing ECOSTRESS mission. The group received the NASA Group Achievement...

Hahn Shot First

After 32 years as Fermilab’s staff photographer, Reidar Hahn is retiring – and saying farewell with a final collection of photos in Fermilab’s art gallery. Hahn has graciously allowed CSA to display some of his best work in future issues of Cold Facts and a CSA online photo gallery.

ADVERTISEMENT

Regenerators

Regenerators or regenerative heat exchangers are a key component of cryocoolers such as pulse tube cryocoolers (Cold Facts, August 2014). Regenerator performance greatly affects the coefficient of performance of cryocoolers. Improvements in regenerator design and, in particular, regenerator materials have been an important factor in the improvement of the performance...

Pulse Tube Cryocoolers

The development of pulse tube cryocoolers has been a significant topic of research and development over the past 20 or so years. Pulse tube cryocoolers have a number of advantages over other types of cryocoolers and are now available commercially. In order to understand pulse tube cryocoolers, it’s best to...

Thermal Expansion

Thermal expansion refers to the change in size (length or volume) that a material undergoes as its temperature changes. In cryogenic systems this effect can be quite large and must be allowed for in the design. In isotropic materials, which include most engineering materials, the thermal expansion is the same...

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Seeking recommendations for commercial sensors

I would like to measure vibrations in small LHe cryostats. Could anybody recommend commercial sensors which would be suitable for the purpose? I am interested in the frequency range between 1Hz and a couple of KHz, with particular attention to the low frequency side.

Estimating cost of carbon steel, pure helium storage tanks

In order to perform an indicative cost assessment of our helium cryogenic plant (still in the design phase), I need an estimation of the cost of carbon steel room temperature pure helium storage tanks. The storage pressure is 20 bar. Can anyone give me suggestions about how to estimate the...

Supplier of pressure sensor that works down to 4.2 K

In an actual experiment we would like to measure the static pressure in a cryostat in the range between one and four bar. Therefore we are looking for some (more or less) cheap pressure sensors that work in liquid helium in the pressure range up to five bar. Unfortunately all...

Looking for reference/textbook suggestions

Can you suggest some reference textbooks for practical thermodynamics applications in cryogenic fields? I need textbooks with cryogenics calculations and examples, dimensioning procedures, second principle applications in cryogenics, heat load calculations, cryogenic pump application, etc. Do such books exist? Does any similar source of information exist?