Cold Facts Digital – Page 63 – The go-to place for Cryogenics and Superconductivity

Young Professionals 2019: The Next Generation in Cryogenics Part 3

Young Professionals 2019 Part 3 introduces outstanding young professionals (under 40 years of age) who are doing interesting things in cryogenics and superconductivity and who show promise of making a difference in their fields.

Fermilab Achieves World-Record Field Strength for Accelerator Magnet

Scientists at the Department of Energy’s Fermilab (CSA CSM) have achieved the highest magnetic field strength ever recorded for an accelerator steering magnet, setting a world record of 14.1 teslas, with the magnet cooled to 4.5 kelvin or minus 450 degrees Fahrenheit. Lawrence Berkeley National Laboratory held the previous record...

First Hydrogen-Powered Bus Deployed in France

A hydrogen-powered passenger bus has been deployed in France for the first time, a step toward the country’s goal of a 100% clean-fueled bus fleet. With a range of 300km, the bus will run between the towns of Versailles and Jouy-en-Josas in the Yvelines region, and refuel its hydrogen tank...

Quest Thermal Group MLI Enters Space

Quest Thermal Group’s integrated multilayer insulation (IMLI) is currently being used in space on the ISS with NASA's RRM3 flight experiment and on the NASA/Ball Aerospace GPIM spacecraft. The group is also currently designing IMLI for use on the Lucy spacecraft—scheduled to go to Jupiter's asteroids—and is expected to have...

Neutrino Energy to Power IoT Devices

In 2015, it was discovered that neutrinos have mass, so in theory, they can impact matter and give up some of their kinetic energy. Neutrino Energy Group is developing neutrino-based power generators by designing materials that can convert the kinetic energy of a neutrino into electricity. Such devices could be...

A Universal Symbol for Cryogenic Hazards

CSA was recently asked about a universal symbol to denote cryogenic hazards. Our contacts at NIST have helped answer those inquiries. While OSHA (Occupational Safety and Health Administration) does not provide a symbol, a cryogen “shipped” container would be labeled with the Gas Cylinder pictogram and a description of the...

Latest in Defining Cryogenics

Refrigerators and Liquefiers

Two of the most common terms used in cryogenics are “refrigerator” and “liquefier.” These terms describe similar and, as will be seen, in some cases identical components. A refrigerator provides cooling (that is, absorbs heat) at cryogenic temperatures. Refrigerators typically put a working fluid (such as helium) through one of...

Air Separation

Air separation is one of the largest, as well as earliest, industrial applications of cryogenics. In this process, cryogenic temperatures are used to separate air into its constituent gases: nitrogen (78.08%), oxygen (20.95%), argon (0.93%) and carbon dioxide (0.3%). Trace gases such as krypton, neon, xenon and helium total far...

Coefficient of Performance and Figure of Merit

The coefficient of performance (COP) is used to describe the effectiveness of refrigerators, including those operating at cryogenic temperatures. The COP is defined as the amount of heat removed at the cryogenic operating temperature of the refrigerator divided by the amount of work that must be applied to remove the...

Latest in Cryo Central

Food Processing

Cryogenics and Food The industrial gas industry provides a host of products and services related to food. The various gases have useful and sometimes fascinating applications in food industry. “The food industry is not a homogenous industry. The needs of customers processing hamburger vs. poultry vs. strawberries vs. seafood, for...

Primary Standards

Elie K. Track Hypres, Inc. elie@hypres.com http://www.hypres.com/ Primary standards involve the exact definition and realization of units of measurement for various quantities, time, length, mass, voltage, resistance, current, etc. International agreements based on the latest scientific knowledge define those units, and their realizations vary depending on the unit itself. For...

Shrink Fitting

Robin A. Rhodes Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Shrink fitting, (or “compression fitting” as it is sometimes called), is a method used to insert a pin or bushing into a housing or other assembly requiring an extremely tight tolerance fit. It can be used as an alternative to...

Telecommunications

From the Winter 2004 issue of Cold Facts magazine The recent M-Calc IV — 4th Industry Assessment workshop discussing military and commercial applications for low-cost cryocoolers, held in November in San Diego, highlighted progress being made in cryogenics as applied in telecommunications. The reliability and long lifetime of projects now...

Latest in Ask the Experts

An Issue of Pressure and Flow Rate in a Supply Tank

Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...

Using MLI on VJ Line Joints or Cryo Storage Tanks

When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...

Separated layers of ice over a pipe

I want to know that why there are different layers of ice over a pipe carrying a cryogenic fluid, each layer separated with clear marks / lines? What do these layers signify?

Using nitrogen as a cryogen

Is it possible to achieve -200˚C using nitrogen as a cryogen?

CATEGORIES