ADVERTISEMENT

The Robots of CERN

The LHC contains 120 tons of liquid helium kept at 1.9 K. And even with safety systems in place, engineers there prefer to limit underground access when the cryogenic systems are activated. Enter TIM—the Train Inspection Monorail. TIM is a chain of wagons, sensors and cameras that snake along a...

Still Cooling after All These Years

Fifteen years is a long time for any high-tech cryogenic device to continue working, but that is just what an M77 cryocooler aboard NASA's RHESSI satellite has accomplished. Designed by Sunpower, Inc. (CSA CSM), the unit's piston has cycled over 26 billion times over this period. And, as periodic oil...

Cornell Professor Takes Home 2017 Lee Osheroff Richardson Science Prize

Oxford Instruments has awarded Dr. Brad Ramshaw, assistant professor at Cornell University, its 2017 LOR Science Prize. The Lee Osheroff Richardson (LOR) Science Prize promotes and recognizes the novel work of young scientists working in the fields of low temperatures or high magnetic fields in the Americas. The trophy and...

CSA Remembers Peter Gifford 1947 – 2017

We regret to report that Peter Gifford, longtime leader of Cryomech, Inc., passed away in January 2017, surrounded by family and friends at his Syracuse home. He was 68. Gifford was a leader in the cryogenic community, a dedicated member of CSA and one of the second-generation industry leaders affectionately...

CUORE Reaches Its Operating Temperature

The Cryogenic Underground Observatory for Rare Events experiment (CUORE) reached a new milestone in late January when its detector reached its operating temperature of 10 mk. The detector has 19 towers formed from 988 Tellurium oxide crystals, and it weighs nearly 1,650 lbs. Engineers finished installing the detector into the...

ADVERTISEMENT

Joule-Thomson Effect

The Joule-Thomson (JT) effect is a thermodynamic process that occurs when a fluid expands from high pressure to low pressure at constant enthalpy (an isenthalpic process). Such a process can be approximated in the real world by expanding a fluid from high pressure to low pressure across a valve. Under...

Current Leads

One of the challenges of using superconducting magnets is the connection of the magnet to a room temperature power supply. This is accomplished via current leads. The trick is that current leads should ideally have a low heat leak, since they connect room temperature to cryogenic temperature, while at the...

Multilayer Insulation

Multilayer insulation (also referred to as superinsulation) is a key component in the reduction of heat leak to cryogenic systems due to thermal radiation. MLI consists of a series of uncooled reflective surfaces placed in the vacuum space between two surfaces, one warmer than the other. Generally speaking, for ideal...

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

An Issue of Pressure and Flow Rate in a Supply Tank

Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...

Using MLI on VJ Line Joints or Cryo Storage Tanks

When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...