ADVERTISEMENT

LHC Restarted, Researchers Eye 2,700 Bunches per Beam

The Large Hadron Collider (LHC) resumed operations on March 25 when CERN researchers opened its doors to allow particles to travel around the ring for the first time since the year-end technical stop (YETS) began in December 2015. Several updates and interventions took place in LHC accelerators and beamlines during...

LCLS-II Upgrade Will Boost Power of World’s Brightest X-ray Laser

Construction is underway on a major upgrade to LCLS (Linac Coherent Light Source), a unique X-ray laser at the Department of Energy’s SLAC National Accelerator Laboratory. The project, known as LCLS-II, will add a second X-ray laser beam that’s 10,000 times brighter, on average, than the first one and fires...

NASA Completes JWST Cryogenic Testing

NASA researchers have completed cryogenic testing on the science instruments module for the James Webb Space Telescope (JWST). The module contains JWST's science cameras and spectrographs, and had been undergoing four months of monitoring inside a giant thermal vacuum chamber called the Space Environment Simulator (SES) at NASA's Goddard Space...

NASA Scientists Prepare Cold Atom Laboratory for ISS Mission

On a sun-drenched hill in Southern California's San Gabriel Mountains, researchers at NASA's Jet Propulsion Laboratory in Pasadena are making progress on an experimental facility that could create the coldest known place in the universe. It's called the Cold Atom Laboratory (CAL) and is expected to probe the wonders of...

FabLab, a STEM Show for Teen Girls, Launches on FOX

FabLab, a new science television series from the producers of the Teen Choice Awards, has launched on FOX. The show aims to enthuse tween and teen girls about STEM by drawing connections between STEM innovations and efforts to make the world a better place. FabLab is produced in partnership with...

ADVERTISEMENT

Stability

Stability refers to the ability of a device employing superconductors to remain in its superconducting state after part of the superconductor transitions back to its normal conducting state due to a disturbance. While the concept can apply to many superconducting devices—transmission lines, generators, motors, etc.—it is most commonly considered in...

Cable-in-Conduit Conductors

Cable-in-Conduit Conductors (CICC) are a common form of superconducting cable used in large-scale applications. There are several varieties of CICCs, but they all consist of many small, stabilized superconducting wires contained within a conduit through which a coolant (typically supercritical He II) flows. Figure 1 shows the cross section of...

Bayonet Coupling

A bayonet coupling is a demountable joint that allows for quick and easy connection and disconnection of cryogenic components, including transfer lines, cryostats, liquefiers and refrigerators. Bayonets provide a number of advantages, chief among them the ability to connect and disconnect the bayonets while components they connect are still at...

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

An Issue of Pressure and Flow Rate in a Supply Tank

Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...

Using MLI on VJ Line Joints or Cryo Storage Tanks

When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...