Cold Facts Digital – The go-to place for Cryogenics and Superconductivity

New NASA Gears Can Withstand Impact, Freezing Temperatures during Lunar Missions

A joint NASA JPl/Caltech project is developing special gears that can withstand the extreme temperatures experienced during missions to the Moon and beyond. Many exploration destinations in our solar system are frigid and require hardware that can withstand the extreme cold. During NASA’s Artemis missions, temperatures at the Moon’s South...

Technifab Introduces Updated Automatic Dewar Filling Station

Technifab Products (CSA CSM), a producer of cryogenic equipment and systems, released the latest version of their Automatic Fill Station, the AFS-01. The system is designed to fill portable low pressure liquid nitrogen dewars from a pipe system or bulk tank. The AFS-01 puts an emphasis on three main points:...

APS designates Sanford Lab, Morgan State University as historic physics sites

On September 14, the American Physical Society (APS) announced it has designated Sanford Lab Underground Research Facility (SURF) and Morgan State University as two Historic Sites in physics. SURF, located in Lead SD, is being recognized for its role in neutrino research led by Ray Davis while Morgan State University...

Lab Researcher and Physics Undergrad Creates Poster Project Honoring Black Physicists

Inspired by the nation’s grappling with issues of race and racial discrimination, UC Berkeley physics major and Berkeley Lab student assistant Ana Lyons turned to art as a way to contribute to the conversation. Aware of the scientific community’s own self-reflection for its history of racial inequity and discrimination, Lyons...

LIGO, Virgo Detect Most Massive Gravitational-Wave Source Yet

On September 2, researchers at LIGO (Laser Interferometer Gravitational-wave Observatory) in California and Virgo Interferometer have detected a signal from what may be the most massive black hole merger yet observed in gravitational waves. The product of the merger is the first clear detection of an “intermediate-mass” black hole, with...

Pandemic’s Global Slowdown Relieves Helium Industry Pressure

Last September, Cold Facts examined the then-ongoing third global helium shortage (Cold Facts, Vol. 35, Number 4) as it forced the world to reconsider the myriad applications and processes utilizing helium. Now, as the pandemic slows the global economy, helium users and experts are reconsidering what the future of helium...

Latest in Defining Cryogenics

Stability

Stability refers to the ability of a device employing superconductors to remain in its superconducting state after part of the superconductor transitions back to its normal conducting state due to a disturbance. While the concept can apply to many superconducting devices—transmission lines, generators, motors, etc.—it is most commonly considered in...

Cable-in-Conduit Conductors

Cable-in-Conduit Conductors (CICC) are a common form of superconducting cable used in large-scale applications. There are several varieties of CICCs, but they all consist of many small, stabilized superconducting wires contained within a conduit through which a coolant (typically supercritical He II) flows. Figure 1 shows the cross section of...

Bayonet Coupling

A bayonet coupling is a demountable joint that allows for quick and easy connection and disconnection of cryogenic components, including transfer lines, cryostats, liquefiers and refrigerators. Bayonets provide a number of advantages, chief among them the ability to connect and disconnect the bayonets while components they connect are still at...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

Need help comparing chest freezers and upright freezers

Currently we use in our Biobank an upright -80 freezer to store all our samples. We are planning to buy a fully automated bio-repository storage that will do the picking of samples under restricted conditions. But in the meantime I foresee that we have to pick the samples manually. The...

Need recommendations for cryogenic vials

I am looking into standardizing our range of bio storage tubes (cryogenic vials). These will be for both blood and tissue samples and their derivatives. Any recommendations, comments on Micronics, Nalgene, Nunc and or others that are suitable for long term -80 C and -196 C storage, DNA/RNA suitable, would...

We need a custom machine for flash freezing of water

We are an ice making company and have started a new project, which is related to flash freezing of water. It is based on cryogenics technology and we need a custom made machine. I would kindly ask you to pass me a few companies who would be interested in such...

Looking for a pump suitable for cold liquids

I would like to construct a small cooling circuit (appr. 50 x 50 cm) pumping liquid at a temperature down to -120°C from a cold reservoir to the specimen to be cooled. The tubes and connections are not a problem, but does somebody know a pump (suction/compression for circulation) suitable...

CATEGORIES