ADVERTISEMENT

ITER Cryostat Base Positioned; Project 70% Prepared for First Plasma

On May 26, the soup-bowl-shaped base of the ITER cryostat was gradually lifted from its frame, carried across the Assembly Hall to the Tokamak Building and eventually lowered into the Tokamak assembly pit. In a delicate lifting operation, the cryostat base descended into the deep concrete cylinder of the tokamak...

AFCryo, Cryomech Collaborate to Provide Helium Recovery, LN2 Generation

Beginning last year, AFCryo (CSA CSM), a division of Fabrum Solutions, and Cryomech (CSA CSM) worked collaboratively to design and supply a helium recovery system and a liquid nitrogen generation system at the nuclear magnetic resonance (NMR) laboratory at Victoria University of Wellington, New Zealand. While both companies produce cryocoolers...

US Military Getting Serious about Nuclear Thermal Propulsion

The US Department of Defense is getting interested in space-based propulsion. Through a May presolicitation, the US Defense Advanced Research Projects Agency (DARPA) announced its intent to have a flyable nuclear thermal propulsion system ready for a demonstration in 2025.

Revolutionary Microscopy Technique Sees Individual Atoms for First Time

A “game-changing” technique for imaging molecules known as cryo-electron microscopy (cryo-EM) has produced its sharpest pictures yet and, for the first time, discerned individual atoms in a protein. The breakthrough reported by the Max Planck Institute for Biophysical Chemistry in Göttingen, Germany, and the Medical Research Council Laboratory of Molecular...

Cryo-Ops 2020 to Connect Researchers, Industry Professionals in France

Cryo-Ops 2020, the 9th edition of the International Workshop on Cryogenic Operations, will be held in Grenoble, France, November 2-4. Organized by the Département des Systèmes Basses Températures (DSBT) and Université Grenoble-Alpes, the workshop will take place at the Institut Néel campus located in the world-class scientific GIANT (Grenoble Innovation...

ADVERTISEMENT

Joule-Thomson Effect

The Joule-Thomson (JT) effect is a thermodynamic process that occurs when a fluid expands from high pressure to low pressure at constant enthalpy (an isenthalpic process). Such a process can be approximated in the real world by expanding a fluid from high pressure to low pressure across a valve. Under...

Current Leads

One of the challenges of using superconducting magnets is the connection of the magnet to a room temperature power supply. This is accomplished via current leads. The trick is that current leads should ideally have a low heat leak, since they connect room temperature to cryogenic temperature, while at the...

Multilayer Insulation

Multilayer insulation (also referred to as superinsulation) is a key component in the reduction of heat leak to cryogenic systems due to thermal radiation. MLI consists of a series of uncooled reflective surfaces placed in the vacuum space between two surfaces, one warmer than the other. Generally speaking, for ideal...

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

What is the temperature range of cryogenics?

Could you please tell me what is the temperature range of cryogenics? In other words, is -100°F considered cryogenic, or does it start lower? Could I expect to see some extended life in D2 stamping dies? What would the recipe be to achieve the desired results using cryogenics?