ADVERTISEMENT

Neutrino Energy to Power IoT Devices

In 2015, it was discovered that neutrinos have mass, so in theory, they can impact matter and give up some of their kinetic energy. Neutrino Energy Group is developing neutrino-based power generators by designing materials that can convert the kinetic energy of a neutrino into electricity. Such devices could be...

A Universal Symbol for Cryogenic Hazards

CSA was recently asked about a universal symbol to denote cryogenic hazards. Our contacts at NIST have helped answer those inquiries. While OSHA (Occupational Safety and Health Administration) does not provide a symbol, a cryogen “shipped” container would be labeled with the Gas Cylinder pictogram and a description of the...

Innovative Accelerator Achieves Full Energy Recovery

An innovative particle accelerator designed and built by scientists from the US Department of Energy’s Brookhaven National Laboratory and Cornell University has achieved a significant milestone that could greatly enhance the efficiency of future particle accelerators. After sending a particle beam for one pass through the accelerator, machine components recovered...

Hydrogen-Powered Bicycles Offer New Electromobility Concept

Pragma Industries has received an order for 1,000 bicycles from Chilean president Sebastian Pinera after 200 hydrogen bicycles were made available to journalists and world leaders at the recent G7 summit in Biarritz. The company’s founder, Pierre Forté, envisions that the bicycles will have an environmental impact in developing countries.

Particle Accelerators Drive Decades of Discoveries at Berkeley Lab and Beyond

Accelerators have been at the heart of the Department of Energy’s Lawrence Berkeley National Laboratory (Berkeley Lab) since its inception in 1931, and are still a driving force in the laboratory’s mission and its R&D program. Accelerator R&D and experiments at the lab—and lab scientists’ participation in experiments at other...

ADVERTISEMENT

Cold Compressors

A common way to provide cooling below the normal boiling point of helium (4.2K) is to reduce the pressure above the bath of liquid helium, thus also reducing the bath’s equilibrium saturation temperature. For example, to produce a 1.8K bath of liquid helium, the saturation pressure has to be reduced...

Kapitza Conductance

Kapitza conductance refers to the heat transfer between a solid surface and a fluid that covers that surface. Fundamentally, it describes the inherent difficulty in transferring energy from a solid to the fluid covering the solid surface. This phenomenon was first observed by P. L. Kapitza in 1941 while studying...

Thermosyphons

A thermosyphon (or thermosiphon) is a device that transfers heat via natural convection in a fluid. The natural convection is driven by gravity with the colder, denser fluid flowing downhill and the warmer, less dense fluid flowing back up. Thus, thermosyphons connect an object to be cooled with a reservoir...

Cryogenic Electronics

Randall Kirschman, consulting physicist, Mountain View, California ExtElect@gmail.com Cryogenic electronics—the operation of electronic devices, circuits, and systems at cryogenic temperatures—has been a valuable technology for decades. Cryogenic electronics (also referred to as low-temperature electronics, or cold electronics) can be based on semiconductive devices, on superconductive devices, or on a combination...

Particle Physics: High Energy Physics

Cryogenics and High-Energy Physics 1. From symmetry magazine: http://www.symmetrymagazine.org/cms/?pid=1000627: Cryogenics is the study of how materials behave at temperatures near absolute zero. In high-energy particle accelerators, such frigid temperatures reduce the electrical resistance of wires in superconducting magnets, increasing the magnet strength and allowing faster particle acceleration. The same holds...

HTS Degaussing Systems

From the Spring 2009 issue of Cold Facts (Volume 25, Number 2): Thanks to a joint project by the US Navy and a number of industry partners, high temperature superconducting (HTS) technology is now at the heart of an advanced degaussing system aboard the USS Higgins at the naval station...

Magnetic Resonance Imaging

From http://www.superconductors.org: An area where superconductors can perform a life-saving function is in the field of biomagnetism. Doctors need a non-invasive means of determining what’s going on inside the human body. By impinging a strong superconductor-derived magnetic field into the body, hydrogen atoms that exist in the body’s water and...

An Issue of Pressure and Flow Rate in a Supply Tank

Please help solve this problem: A supply tank requires a vaporizer to generate sufficient pressure to pump stored fluid up into a vehicle or tank. The available head is limited as the tank level falls and it is important to minimize the system pressure drop to maintain the desired flow...

Using MLI on VJ Line Joints or Cryo Storage Tanks

When installing Multi Layer Insulation (MLI) blankets on VJ line joints or cryo storage tanks should they be wrapped and tied down tight or loose? These are usually pre-cut to size. Also should they have an access hole at the point of where the molecular sieve is installed to help...